813327
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
Connection of Flue pipe:
The Stove is mounted with Flue adap-
tor on top or on the rear side.
When mounting on the rear side the
Flue adaptor and cover switch places.
The cast iron cover (not inclued in all
stoves)is placed in the hole on top of
the cast iron top.
The chimney:
Always use a chimney with a diameter of at least 15 cm. This corresponds to a clear of 175
cm2. Make sure the chimney is of a sufficient height, that it draws well and that smoke does not
bother your neighbours.
We recommend that you fit your chimney with a damper, allowing for draft control. This may
prove particularly important on windy days.
Note: the damper must never shut off draught completely always allow at least 20 cm² free
passage through the chimney.
With nominal usage the stove has tested a flue gas flow of 6,2g/second and with a flue gas tem-
perature of 335°C and at a room temperature of 20 °C.
Varde stoves are always fitted with a smoke plate which redirects smoke to make its way to the
chimney as effectively as possible. This ensures that the heat from the smoke is emitted inside
your home rather than outside it. The smoke plate is moveable and placed in top of the Com-
bustion Chamber. You should make sure that it is pushed all the way back against the back wall
of the combustion chamber.
This roomheater is permissiable for installation in a shared flue system.
Draught conditions
Consult your local stove dealer about how best to adjust the draught in your chimney.
Hight of chimney
If in doubt, contact your local stove dealer. He will be able to inform you of the correct hight.
Information about the new cast iron adapter, Part no.: 134
Your stove is equipped with the new cast iron adapter from Varde Ovne.
The adapter is suitable for smoke pipes with inner diameter on 150 mm.
If you need it, it’s now possible for you to make a condensate drain-hole in the adapter.
Carefully punch a chisel or the like through the bottom of the outer groove (at the
Arrow mark for the hole. Now the condensate hole is
ready.
Carefully punch a hole with a
chisel or the like.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Varde Glasgow at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Varde Glasgow in the language / languages: English as an attachment in your email.

The manual is 1.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info