813312
15
Zoom out
Zoom in
Previous page
1/22
Next page
15
Maintenance
Like any piece of equipment in daily use, your stove needs maintenance.
The stove should only be cleaned when cold. Use a dry cloth for cleaning the exterior of the
stove.
Clean the interior regularly by removing ashes, soot and tar from the combustion chamber. The
smoke deflector plate should be removed for cleaning, as the reverse side will be covered in dirt
and soot. Finally check that the smoke pathway through the flue pipe and chimney is completely
clear. You should also inspect the rope seals in the door and ash pan for signs of wear. Replace
them if they no longer seal properly. Also, remember to lubricate the door hinges as required.
Glass pane
The glass pane should be cleaned using Varde Glas Cleaner, which is available at all DIY centres
selling Varde Ovne stoves.
Empty the Ash pan regularly. It can be emptied into your dustbin, as long as you make sure it
does not contain any hot embers. If in doubt about how to clean your stove, contact the dealer
where you bought your stove, or your chimney sweeper.
It is especially important to check the stove and the chimney for blockages after a long period of
non-use.
The enamelled surface of the stove may wear down in certain places if the stove is overheat-
ed. Worn surfaces can, however, be repaired with a special Senotherm
®
spray paint, available
from your local dealer.
The plates in the combustion chamber are vermiculite plates and will eventually become
worn, as will the smoke deflector plate. Accidental breakage of a plate, for instance by hitting it
hard with a piece of wood, will not affect the quality of the combustion. You do not need to re-
place the plate until the gap is 5 mm wide.
Only use original parts from Varde Ovne A/S
The door is equipped with a spring, which pulls the gate closed. This is a legal requirement in
many countries. The spring is fitted to the hinged side of the door but can be removed if you
prefer the door not to be spring-loaded.
Do not make any unauthorised changes to the stove.
All external parts of the stove become hot during use, and you should therefore exer-
cise due caution.
IMPORTANT!!
Chimney fires
Should your chimney catch fire, cut off the air supply to the stove’s combustion chamber and
contact the emergency service. (The majority of fires die out after the oxygen supply is cut off.)
You should subsequently contact your chimney sweeper, who will check your stove and chimney
for damage
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Varde Fuego at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Varde Fuego in the language / languages: English as an attachment in your email.

The manual is 1.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varde Fuego

Varde Fuego Additional guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info