813312
8
Zoom out
Zoom in
Previous page
1/22
Next page
8
The chimney
Always use a chimney with a diameter of at least 15 cm. This corresponds to a bore of 175 cm
2
.
Make sure the chimney is of sufficient height, that it draws well and that the smoke does not
bother your neighbours.
We recommend that you fit your chimney with a damper, allowing for draft control. This may
prove particularly important on windy days. Note: the damper must never shut off draught com-
pletely – always allow at least 20 cm
2
free passage through the chimney.
With nominal usage the stove has tested a flue gas flow of 5.5 g/second, with a flue gas temper-
ature of 340°C and at a room temperature of 20°C.
Varde Ovne stoves are always fitted with a smoke deflector plate which redirects smoke to
make its way to the chimney as effective as possible. This ensures that the heat from the smoke
is emitted inside your home rather than outside it. The smoke deflector plate is moveable and
placed in the combustion chamber. You should make sure that it is pushed all the way back
against the back wall of the combustion chamber.
Draught conditions
Consult your local chimney sweeper about how best to adjust the draught in your chimney.
Height of chimney
If in doubt, contact your local chimney sweeper. He will be able to inform you of the correct
height.
Connection of Flue pipe
Information about the new cast iron adapter, part no. 134
Your stove is equipped with the new cast iron adapter from Varde Ovne. The adapter is suitable
for standard flue pipes with an inner diameter of 150 mm.
It is now possible for you to make a condensate drain hole in the adapter if your stove is directly
connected to a steel chimney:
Carefully punch a chisel or the like through the bottom of the outer groove (at the
arrow mark). This way you can establish a condensate drain hole in the adapter if
Arrow mark for drain hole. Now the condensate drain
hole is ready.
Carefully punch a hole with a
chisel or the like.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Varde Fuego at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Varde Fuego in the language / languages: English as an attachment in your email.

The manual is 1.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varde Fuego

Varde Fuego Additional guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info