813301
4
Zoom out
Zoom in
Previous page
1/12
Next page
User Instructions
3. Chimney Sweeping
3.1 To maintain safe and efficient use of the appliance, the
chimney/flue must be inspected and swept at least once a
year by a qualified chimney sweep*.
If the appliance is used continuously throughout the year,
or it is used to burn wood, more frequent sweeping is
recommended.
The best time to have the chimney swept is at the start of
the heating season.
3.2 The chimney, any connecting flue pipe and the appliance
flue ways, if incorporated, must be regularly cleaned.
3.3 Ensure adequate access for cleaning where it is not
possible to sweep through the chimney.
3.4 If the chimney is believed to have previously served an open
fire it must be swept a second time within a month of regular
use after installation.
4. Annual Service
4.1 Before the start of the heating season strip, inspect and
clean the appliance as detailed:
Allow appliance to cool.
Remove all internal parts. Take care handling firebricks (if
applicable) as they can become fragile after a period of use.
Sweep the appliance chimney/flue at this point if
necessary.
Vacuum clean any remaining ash and debris from the
inside of the appliance. Stovax offer a filter/collection
attachment for vacuum cleaners to protect them from fire
ash: Ash Clean (Stovax Part No. 2091).
Check the parts for any damage. Replace any damaged
parts using only genuine replacements parts.
Check and clean the firebricks (if applicable) with a soft
brush.
Some surface damage will occur during use. The life of the
bricks will depend on the type of fuels burnt and the level of
use. Replace damaged bricks as soon as possible.
Re-fit cleaned internal parts.
4.2 On appliances with printed glass do not use cleaning
agents that have a high alkaline or acidic content, for
example Stovax Gel Cleaner, these are aggressive
cleaning agents designed to be used with heavily
stained clear glass. On printed glass surfaces, use
Stovax Glass Cleaner (Stovax No.4103) which is better
formulated for this application.
Before applying a cleaning agent remove any dust and
loose soot with a damp cloth.
Use an appropriate glass cleaner. Apply the cleaning fluid
to a cloth before rubbing onto the glass.
Apply carefully and do not apply excessively. Try to
prevent any run off which could soak into the rope seals
around the edge of the glass.
Soot can also contain acidic particles that can cause
corrosive damage to printed glass.
Remove dirt with a moist cloth and buff dry.
Before relighting the appliance ensure the glass is fully
dried.
If the rope seal has absorbed excess cleaning agent
it is advisable to replace the rope as soon as possible to
preserve the printed finish of the glass.
4.3 Check door rope seal and replace if required.
4.4 Lightly oil the door catch mechanism and hinge pins.
Avoid getting oil onto the door seals and glass.
4.5 To refresh painted finishes a touch up spray is available.
Contact your retailer quoting the model and serial number
found on the appliance date badge.
4.6 Use genuine replacement parts to keep the appliance in
safe, efficient working order:
These products, along with regular maintenance and use
of correct fuels, will keep the appliance in the best possible
condition.
4.7 For more information about the Stovax Group products
please visit our web site at www.stovax.com
4.8 Burn at a low temperature for the first day of use after any
maintenance. This allows the seals, fixing glues and paint to
fully cure.
4.9 During this time the appliance may give off some unpleasant
odours. Keep the room well ventilated to avoid a build-up of
fumes.
4.10 Your retailer can carry out service and maintenance if
required.
5. Seasonal Use
5.1 Clean and service the appliance if not used during the
warmer months, as detailed in the Annual Service section.
5.2 Set the air controls open to 50% to keep the appliance venti-
lated and stop the build-up of any moisture inside.
5.3 Before re-lighting the appliance:
—Remove the baffles.
—Clear any debris that may have accumulated.
—Check the flue is clear of any blockages.
*Registered on the Competent Persons Scheme (GB
only) see page 34/ INFO (Republic of Ireland).
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Varde Aura 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Varde Aura 3 in the language / languages: English as an attachment in your email.

The manual is 1.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varde Aura 3

Varde Aura 3 User Manual - English - 12 pages

Varde Aura 3 Usermanual and installation guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info