382344
4
Zoom out
Zoom in
Previous page
1/12
Next page
VAPORETTO ECO PRO 3000
43
E
E
N
N
G
G
L
L
I
I
S
S
H
H
The wiring system to which the appliance is
connected must always comply with the
laws in force.
Before connecting the appliance, make
sure that the mains voltage is the same as
the voltage indicated on the data label of
the appliance and that the power outlet is
connected to earth
Always turn off the appliance at the on/off
switch before unplugging it.
If the appliance is left unused, always di-
sconnect it from the mains. Never leave the
appliance unattended with the cable plug-
ged into the mains.
Always make sure the appliance is unplug-
ged before performing maintenance work of
any kind
• Do not pull the power cable out of the
socket, but grasp the plug itself to avoid da-
mage to the socket.
Do not allow the power cable to be twisted,
crushed, stretched, or come into contact
with sharp or hot surfaces.
Do not use the appliance if the power cable
or other important parts are damaged.
Do not use electric extension leads that are
not authorized by the manufacturer, as they
may cause damage or fire.
If it is necessary to replace the power sup-
ply cable, please refer to the nearest Polti
authorised service centre, since the use of
a special tool is necessary.
Never touch the appliance with wet hands
or feet with the cable plugged into the
mains.
Do not use the appliance when barefoot.
Do not use the appliance near a bathtub,
shower or container full of water
Never immerse the appliance, the cable or
the plugs in water or another liquid.
Use of the appliance in places where there
is a danger of explosions is prohibited.
Do not use the product with toxic substan-
ces.
Do not lay the hot appliance on surfaces
sensitive to heat.
Do not leave the appliance exposed to wind
or rain.
Do not place the appliance near a live ele-
This unit conforms with EC-directives
89/336 as amended by 93/68 (EMC)
and 73/23 as amended by 93/68 (low
voltage).
Polti S.p.A. reserves the right to change
equipment or accessory specification without
prior notice.
T
T
H
H
E
E
S
S
U
U
P
P
E
E
R
R
P
P
O
O
W
W
E
E
R
R
S
S
Y
Y
S
S
T
T
E
E
M
M
This steam generator is equipped with the in-
novative new Super Power system device,
using 2 electric heating elements (a 1250 W
working element and a 750 W back-up ele-
ment) to heat water. They are controlled by a
pressure switch with differential calibration
designed to guarantee that the appliance pro-
vides a better, more constant performance.
The appliance absorbs most power when
cold, to ensure rapid heating of water in the
boiler. Once a certain pressure level has been
reached, a cut-out reduces absorption of
electricity. The appliance continues heating at
reduced pressure until it reaches the correct
working pressure. This condition continues
during operation, to maintain constant steam
temperature and pressure. If continued steam
consumption causes the pressure in the boi-
ler to drop below a certain level, maximum
power is once again absorbed, rapidly resto-
ring the correct operating pressure. When
the iron is in use, it will not begin heating until
the first pressure level has been reached.
This feature guarantees optimal performance
and heats water faster when the appliance is
first turned on.
P
P
R
R
E
E
C
C
A
A
U
U
T
T
I
I
O
O
N
N
S
S
KEEP THESE INSTRUCTIONS
Read these instructions for use carefully
before using the appliance, and make sure
that anyone using the machine is familiar
with these instructions and the warnings.
DO NOT USE THE STEAM FUNCTION
ON DRAYLON, VELVET, LEATHER OR
OTHER SENSITIVE FABRICS.
Any use which does not comply with these
instructions will invalidate the warranty.
VT ECO PRO 3000 M0S07067 - 1O04:VT 2300 M0S05357 1L05 06/05/2008 10.31 Pagina 43
4


Need help? Post your question in this forum.

Forumrules
1

Forum

vaporetto-3000-eco-pro

Reset search

  • The machine heats up pressure but won't give any steam at all Submitted on 28-8-2022 at 15:18

    Reply Report abuse
  • My 3000 has been unused in its bag in the garage for about 10 years still looks like new. Now when I press the buttons, no lights come on will not work. Fuse tested it ok. Any thoughts why it won’t work. Submitted on 2-9-2020 at 11:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaporetto 3000 eco pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaporetto 3000 eco pro in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info