424995
9
Zoom out
Zoom in
Previous page
1/60
Next page
Chapter 2>> Controls and Functions
9
Engllish
Additional function
1. Learning Method
If there is no further action within 30 seconds in LEARN MODE, the remote control turns to
normal operation mode switching LED off.
TV Power key doesn’t have Default key data.
The Learning Method
Only the key of “TV Power”has Learning function.
Toggle Learning (Continuous 2 codes should be learned in TV Power key)
1st Learned data is produced upon 1st press and then 2nd Learned data will be produced
upon next pressing on the TV Power key.
If you press [TV Power + OK] KEYs at the same time for 1.5 seconds, the remote goes into
leaning mode. => Then LED ON will be “ON’ for 30 seconds. If there is no further action, it
will automatically turn back to normal mode after 30 seconds switching LED off.
Press TV Power key one more time. LED blinks one time and then LED will be “ON”.
Press 1st SOURCE KEY (Power key of the original key)
If it learns correctly, --- LED will be “ON”after blinking Two Times.
- If it does not learn correctly, --- LED will be “ON” after blinking 5 Times
- If there is no input Signal for 30 seconds, the remote will stay in learning mode after
blinking 5 times.
- If no further input signal for another 30 seconds, the remote will return to normal operation
mode. LED will be OFF.
- If you want to teach it again, then you need to press TV Power key. --- LED will stay
“ON”after blinking one time.
Now you learned one code from your original TV power key. Please press TV Power key
one more time. --- LED will stay ON after blinking one time.
=> If the rst TV Power code is learned correctly (after LED Blinking two times), 2nd code
can be taught.
Please press 2nd SOURCE KEY(Any numeric key from the original remote control. For
example Number 1)
If it learns correctly, --- LED will be “ON” after blinking Two Times.
If it does not learn correctly, --- LED will be “ON” after blinking 5 Times
=> If there is no input Signal for 30 seconds, the remote will stay in learning mode after
blinking 5 times.
If no further input signal for another 30 seconds, the remote will return to normal operation
mode. LED will be OFF.
=> If you want to teach it again, then you need to press TV Power key. --- LED will stay
“ON” after blinking one time.
If you press [TV Power + OK] Keys at the same time, it turns back to normal operation
mode after LED blinking 3 times.
2. Low Battery Warning Function
It is the fuction to check if the battery has LOW VOLTAGE
If you press [STB Power] KEY at the level that IC’s OPERATING VOLTAGE is as low as
“2.2V ~ 2.3V”, power code will be produced blinking LED 3 times.
At that LOW VOLTAGE level, you can not go into LEARNING MODE.
Remote Control Unit
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vantage hd 8000s pvr twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vantage hd 8000s pvr twin in the language / languages: English as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vantage hd 8000s pvr twin

Vantage hd 8000s pvr twin User Manual - German - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info