424909
22
Zoom out
Zoom in
Previous page
1/60
Next page
Chapter 5 >> Main Menu
22
English
Note
What is Low Noise Block (LNB)?
The LNB is located at the satellite dish antenna. It amplies the very weak received
satellite signal then converts the received microwave satellite signal so that the signal
may not decrease the gain between the dish and your receiver.
DiSEqC (Digital Satellite Equipment Control) Mode
You can select DiSEqC using the Arrow (◄/►) buttons.
You can select one mode among DiSEqC Port1~4 for 1.0 and Tone Burst 1~2 and Off.
Tone 22KHz
In case you are using a dual LNB or two antennas connected to a 22KHz Tone Switch
Box, with 22KHz Tone Switch (On, Off, or Auto) you can switch between LNB or antenna.
Motor
Select motor setting from DiSEqC, USALS, Positioner, and No.
DiSEqC 1.1
In case of DiSEqC 1.1 usage, select port 1~16 for the satellites by using the Arrow
(◄/►) button.
Signal Status
Press the blue button, you can check the signal status for each TP and Satellite with the
Arrow(◄/►▲/▼)buttons.
You can scan the selected satellite and TP and save the changes.
- Green button: Satellite Auto Scan
- Yellow button: TP Scan
4 After setting the option, press the OK or RED button to save.
Select satellite(s) according to the direction of your satellite dish. You can select many
satellites depending on the direction to the satellites
5 Press the Back button to return to the Installation menu.
Anmerkung
DiSeqC is the registered trademark of Eutelsat Communications.
A standard through which is possible to let a DiSEqC compatible receiver send a signal
over the RF cable to a switching device to switch between different LNBs or dishes. The
DiSEqC uses the 22KHz signal to control the switching device
Installation
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vantage hd 8000 c twin pvr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vantage hd 8000 c twin pvr in the language / languages: English as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vantage hd 8000 c twin pvr

Vantage hd 8000 c twin pvr User Manual - German - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info