540880
60
Zoom out
Zoom in
Previous page
1/85
Next page
Vanguard
TM
Twin-Cylinder OHV Liquid-Cooled Engine
Section 4 - Engine Overhaul
Page 55
6. Install idle mixture screws and springs. DO NOT
tighten screws at this time, Fig. 132.
DO NOT install limiter caps at this time.
Fig. 132
7. Install main jets and pilot jets, Fig 133.
“L” or #1 cylinder is equipped with #114 main jet . “R”
or #2 cylinder is equipped with #118 main jet . Both
pilot jets are #48.
Fig. 133
8. Assemble inlet valve to float and install float
assembly, Fig. 134.
Fig. 134
9. Install lower body gasket.
Make sure gasket does not twist or kink.
10. Assemble lower body. Make sure gasket remains
in position, Fig. 135. Tighten screws to
22 in. lbs.
(2.5 Nm)
.
Fig. 135
11. Install fuel shut off solenoid with washer.
a. Torque to 90 in. lbs. (10.0 Nm).
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard Twin Cylinder OHV Liquid-Cooled at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard Twin Cylinder OHV Liquid-Cooled in the language / languages: English as an attachment in your email.

The manual is 7,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info