540878
277
Zoom out
Zoom in
Previous page
1/281
Next page
276
14
Reject Dimensions (260700 & 261700) Standard Size Reject Size
Sump Cover (260700 & 261700)
PTO Bearing 1.625 in. (41.28 mm) 1.628 in. (41.35 mm)
Camshaft Bearing .6255 in. (15.89 mm) .6280 in. (15.95 mm)
Counterweight Pivot Shaft .5 in. (12.7 mm) .498 in. (12.65 mm)
Crankshaft (260700 & 261700)
Crank Pin Journal 1.624 in. (41.26 mm) 1.622 in. (41.22 mm)
Mag-Side Journal 1.624 in. (41.26 mm) 1.622 in. (41.22 mm)
PTO-Side Journal 1.624 in. (41.26 mm) 1.622 in. (41.22 mm)
Eccentrics 2.6811 in. (68.10 mm) 2.679 in. (68.05 mm)
Camshaft (260700 & 261700)
Mag-Side Journal .6250 in. (15.88 mm) .6229 in. (15.82 mm)
PTO-Side Journal .6250 in. (15.88 mm) .6229 in. (15.82 mm)
Intake lobes N/A 1.375 in. (34.93 mm)
Exhaust lobes N/A 1.375 in. (34.93 mm)
Compression Release Lobe (Before 911209xx) N/A
.025-.030 in. (.64-.76 mm)
Compression Release Lobe (After 911208xx) N/A
.065-.070 in. (1.65-1.78 mm)
Counterweight Assembly (260700 & 261700)
Pivot Shaft Bore .5015 in. (12.74 mm) .5031 in. (12.78 mm)
Counterweight Pin Bore .6281 in. (15.80 mm) .6230 in. (15.82 mm)
Link Pin .6205 in. (15.76 mm) .6189 in. (15.72 mm)
Connector Pin Bore .6221 in. (15.80 mm) .6230 in. (15.82 mm)
Connector Eccentric Bore 2.862 in. (68.12 mm) 2.684 in. (68.17 mm)
Connecting Rod (260700 & 261700)
Crank Pin Bearing 1.625 in. (41.30 mm) 1.627 in. (41.33 mm)
Piston Pin Bearing .8009 in. (20.34 mm) .8013 in. (20.35 mm)
Piston (260700 & 261700)
Piston Pin Diameter .8005 in. (20.33 mm) .80 in. (20.32 mm)
Piston Pine Bore .8009 in. (20.34 mm) .8013 in. (20.35 mm)
Ring End Gap (Top) .006-.014 in. (.15-.35 mm) .030 in. (.76 mm)
Ring End Gap (Middle) .006-.014 in. (.15-.35 mm) .030 in. (.76 mm)
Ring End Gap (Oil Control) .006-.014 in. (.15-.35 mm) .030 in. (.75 mm)
Ring Land Clearance (Top) .001-.003 in. (.03-.07 mm) .004 in. (.10 mm)
Ring Land Clearance (Middle) .001-.003 in. (.03-.07 mm) .004 in. (.10 mm)
Ring Land Clearance (Oil Control) .001-.003 in. (.03-.07 mm) .008 in. (.20 mm)
Starter Rope (260700 & 261700)
Rope Size #6 (4.76 mm) N/A
Rope Length 62 in. (1.6 m) N/A
277


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard Single Cylinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard Single Cylinder in the language / languages: English as an attachment in your email.

The manual is 8,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info