Manual Vanguard Single Cylinder (page 273 of 281) (English)

540878

273

Zoom out

Zoom in

1/281

272

Fastener Torque Specifications (104700) Tool Size Torque

Oil Pump Cover 8 mm 55 ln-in. (6 Nm)

Oil Pump Screen 7 mm 35 lb-in. (4 Nm)

Rewind Retainer Screw Phillips 70 lb-in. (8 Nm)

Rewind Starter 8 mm 55 lb-in. (6 Nm)

Rocker Arm Stud 10 mm 85 lb-in. (10 Nm)

Rocker Arm Pivot 10 mm N/A

Rocker Ball Set Screw or Nut T-15 50 lb-in. (6 Nm)

Spark Plug 5/8 in. 180 lb-in. (20 Nm)

Starter Drive Cover 7/32 in. 35 lb-in. (4 Nm)

Starter Motor Bracket 10 mm 140 lb-in. (16 Nm)

Starter Motor Thorough Bolts 8 mm 35 lb-in. (4 Nm)

Stator 1/4 in. 30 lb-in. (3 Nm)

Valve Cover 8 mm 45 lb-in. (5 Nm)

Reject Dimensions (104700) Standard Size Reject Size

Cylinder (104700)

Magneto Bearing 1.182 in. (30.02 mm) 1.184 in. (30.07 mm)

Camshaft Bearing .5010 in. (12.73 mm) .5031 in. (12.78 mm)

Bore Diameter 2.561 in. (65.06 mm) 2.464 in. (65.12 mm)

Bore Out-Of-Round N/A .0015 in. (.04 mm)

Cylinder Head (104700) Standard Size Reject Size

Intake Valve Seat Angle 45° N/A

Intake Valve Seat Width 3/64-4/64 in. (.79-1.19 mm) N/A

Intake Valve Stem Diameter .2354 in. (5.98 mm) .2346 in. (5.96 mm)

Intake Valve Guide .2380 in. (6.05 mm) .24 in. (6.10 mm)

Exhaust Valve Seat Angle 45° N/A

Exhaust Valve Seat Width 3/64-4/64 in. (1.19-1.59 mm) N/A

Exhaust Valve Stem Diameter .2354 in. (5.98 mm) .2346 in. (5.96 mm)

Exhaust Valve Guide .2380 in. (6.05 mm) .24 in. (6.10 mm)

Sump Cover (104700)

PTO Bearing 1.182 in. (30.02 mm) 1.184 in. (30.07 mm)

Camshaft Bearing .6899 in. (17.52 mm) .6930 in. (17.6 mm)

Crankshaft (104700)

Crank Pin Journal 1.23 in. (31.24 mm) 1.228 in. (31.19 mm)

Mag-Side Journal 1.181 in. (30.0 mm) 1.179 in. (29.95 mm)

PTO-Side Journal 1.181 in. (30.0 mm) 1.179 in. (29.95 mm)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard Single Cylinder in the language / languages: English as an attachment in your email.

The manual is 8,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vanguard Single Cylinder Manual

Product: