540878

Vanguard Single Cylinder Manual

65
Zoom out
Zoom in
Previous page
1/281
Next page
64
3
3. Remove the screws holding the control
bracket ([A] Fig. 11).
Fig. 11
4. Remove the clamp that secures the
governor lever to the shaft.
Control Bracket Removal
(161400)
1. Remove governor lever.(A).
2. Disconnect springs and links (B) from
governor lever.
3. Remove head bolts (C) that secure the
control bracket to the cylinder head. When
baffle is removed, re-install the bolts hand
tight.
4. Remove the oil fill tube screw.([D] Fig. 12)
5. Remove control bracket screws.([E] Fig.
12).
Fig. 12
6. Remove the wire from the Oil Gard®
terminal and the stop switch.
Control Bracket Removal
(260700, 261700)
NOTE: For better access to the control bracket,
remove the oil filter adapter first. SEE SECTION
3- OIL FILTER ADAPTER.
1. Remove the links and springs from the
governor lever ([A] Fig. 13).
Fig. 13
2. Loosen governor lever screw and nut ([B]
Fig. 13).
3. Remove control bracket screws ([A] Fig.
14).
Fig. 14
Disconnect ground wires and remove the
connector from the bracket.
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard Single Cylinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard Single Cylinder in the language / languages: English as an attachment in your email.

The manual is 8,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info