540878
37
Zoom out
Zoom in
Previous page
1/281
Next page
36
2
Fig. 9
Fig. 10
Fig. 11
DC Shunt
When checking DC output on systems over 10
Amps, use a digital multimeter with the DC Shunt
([#19468] Fig.12) to avoid blowing a fuse in the
multimeter.
Fig. 12
Tachometers
Tachometers are available from your Briggs &
Stratton source of supply. Order Tachometer
#19200 (A) or Digital Tachometer & Hourmeter
#19389 ([B] Fig. 13).
Fig. 13
ALTERNATOR OUTPUT TESTS
DC Only Alternator
The DC alternator provides current for charging a
12 volt battery. Current from the alternator is
unregulated and is rated at 3 amps. The output
rises from 2 amps at 2400 RPM to 3 amps at
3600 RPM.
Use an accurate tachometer and a tang bender
to temporarily adjust the engine speed to the
RPM specified in the test instructions before
testing alternator output.
Perform alternator tests in the following
sequence:
1. Test alternator output.
0 10 20 30
OF F
CO M
V
10A
FUS ED
V
30 0m V
V
A
A
~
Diode Test
Insert the BLACK test lead
into the COM receptacle of
the multimeter. Insert the
RED test lead into the V
receptacle. Set the rotary
switch to+))))). This setting
also signals continuity with
a continuous tone.
0 10 20 30
OF F
COM
V
10A
F USED
V
30 0m V
V
A
A
~
AC Amps
Insert the BLACK test lead
into the COM receptacle of
the multimeter. Insert the
RED test lead into the 10A
receptacle. Set the rotary
switch toA~.
0 10 20 30
OF F
CO M
V
10A
FUS ED
V
30 0m V
V
A
A
~
DC Amps under 10 Amps
Insert the BLACK test lead
into the COM receptacle of
the multimeter. Insert the
RED test lead into the 10A
receptacle. Set the rotary
switch to A===.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard Single Cylinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard Single Cylinder in the language / languages: English as an attachment in your email.

The manual is 8,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info