540878
28
Zoom out
Zoom in
Previous page
1/281
Next page
27
1
7. Tighten the jamb nut without moving the
adjustment screw Fig. 46, 47, 49, 49.
Fig. 46
8. Rotate the crankshaft through a few
revolutions and recheck the clearance.
Fig. 47
Fig. 48
Fig. 49
Combustion Chamber Deposits
Remove combustion chamber deposits every
500 hours or whenever cylinder head is
removed.
With the piston at Top Dead Center (TDC),
remove combustion chamber deposits from top
of piston with a plastic scraper or a scotch pad.
CAUTION: Use care to prevent debris from
entering push rod or oil return cavities in cylinder.
Do not damage cylinder, top of piston, cylinder
head and cylinder head gasket surfaces.
It is not necessary to remove the discoloration
marks on the piston, valves and/or cylinder head.
These marks are normal and will not affect
engine operation.
Remove the loose deposits from around the top
ring land area using compressed air and a soft
bristle brush.
WARNING
Wear eye protection when using
compressed air to clean parts.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard Single Cylinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard Single Cylinder in the language / languages: English as an attachment in your email.

The manual is 8,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info