540878
18
Zoom out
Zoom in
Previous page
1/281
Next page
17
1
Throttle Control
(161400, 104700, 260700, 261700)
Refer to Figures 16 and 17 that show your
engine.
1. Loosen casing clamp screw (A).
2. Move throttle to FA ST .
3. Move casing in direction of arrow (B) until
casing stops.
4. Tighten casing clamp screw.
Fig. 16
Fig. 17
Choke Control
(050000, 085400, 086400, 115400, 117400,
118400, 138400, 185400, 235400, 245400)
The choke on these models has a separate
manual control.
Ensure that the choke valve is completely open
or closed when the control is moved through its
range of motion.
Choke-A-Matic®
(104700, 161400, 260700, 261700,
28Q700)
Choke control cables are often provided by the
original equipment manufacturer. Please refer to
the information provided by the OEM when this
general description is not sufficient to adjust the
choke control.
1. Loosen choke control casing clamp screw
on engine control panel or governor
control bracket.
2. Move choke control lever or knob to
CHOKE.
3. Move choke control casing in the direction
that completely closes the choke valve.
4. Tighten the casing clamp screw.
Choke-A-Matic® Adjustments (161400)
Refer to the figure that shows your engine.
1. Move throttle control to FAST. The end of
the choke link should contact the end of
the choke lever slot. To adjust, expand or
contract loop (A) in the choke link.
2. Move equipment control lever to CHOKE.
The choke plate must be closed. Readjust
as required.
Fig. 18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard Single Cylinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard Single Cylinder in the language / languages: English as an attachment in your email.

The manual is 8,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info