540881
36
Zoom out
Zoom in
Previous page
1/159
Next page
33
3
Inspect Governor Actuator
1. Disconnect harness at connector (A, Figure
29).
2. Touch test leads (B) to terminals of a known
good 12 volt battery.
• Actuator lever (C) should quickly move the
throttle to a wide open position (D).
3. Remove test leads from battery terminals.
• Actuator lever should quickly move throttle
lever to idler position.
4. Replace actuator if not to specification.
Figure 29
Remove Governor Actuator
1. Disconnect governor link spring and link (A,
Figure 30).
2. Remove two screws (B) and actuator (C).
Figure 30
Install Governor Actuator
1. Assemble governor link spring and link to
actuator lever (Figure 31).
NOTE: Open ends of spring must face cylinder
head.
2. Assemble actuator to mounting bracket
loosely. Do not tighten screws.
Figure 31
3. Rotate throttle lever clockwise to end of travel
and hold in this position.
4. Slide actuator until governor link is positioned
slightly to rear of hole in throttle lever bushing
(Figure 32).
5. Torque mounting screws to values listed in
Section 14 - Engine Specifications.
6. Assemble governor link and spring to throttle
lever.
Figure 32
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard 3-Cylinder OHV Liquid-Cooled Gasoline at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard 3-Cylinder OHV Liquid-Cooled Gasoline in the language / languages: English as an attachment in your email.

The manual is 10,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info