540881
30
Zoom out
Zoom in
Previous page
1/159
Next page
27
3
Figure 10
Disassemble Governor Shaft Assembly
1. Remove cotter pin (A, Figure 11) and washer
(B). Discard cotter pin.
2. Remove screws (C) and governor paddle (D)
using Torx® Driver #19445. Discard screws.
NOTE: Governor paddle screws are Torx® tamper
proof screws.
3. Remove shaft (E) and spacer (F).
4. Remove and discard oil seal (G).
Figure 11
Replace Timing Gear Cover Oil Seal
1. Drive out oil seal.
2. Use Seal Driver #19423 to install new oil seal
(Figure 12).
Figure 12
Assemble Governor Shaft Assembly
1. Install thrust washer (A, Figure 13) on shaft
followed by the governor gear (B), E-ring
(C), and governor cup (D).
Figure 13
NOTE: Lubricate governor shaft with engine oil
before installing.
2. Install new oil seal (A, Figure 14) with seal
lips in.
3. Install governor shaft (B) and spacer (C).
4. Install governor paddle (D) using new screws
(E). Use Torx® Driver #19445. Torque to
values listed in Section 14 - Engine
Specifications.
5. Install washer (F) and new cotter pin (G).
NOTE: Governor shaft must rotate freely.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard 3-Cylinder OHV Liquid-Cooled Gasoline at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard 3-Cylinder OHV Liquid-Cooled Gasoline in the language / languages: English as an attachment in your email.

The manual is 10,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info