540881

Vanguard 3-Cylinder OHV Liquid-Cooled Gasoline Manual

16
Zoom out
Zoom in
Previous page
1/159
Next page
13
2
Figure 16
10. Valve faces may be resurfaced to 30°. Check
valve seat dimensions before resurfacing. (A,
Figure 17) should be 0.05 - 0.06” (1.2 -
1.6mm) and (B) should be at least 0.0312”.
Figure 17
• Lap valves and seats with Valve Lapping
Tool #19258 and Valve Lapping
Compound #94150.
11. Valve seats may be reconditioned using
Valve Seat Cutter #19446.
NOTE: Inspect valve guide bushings first. If valve
guides are worn, they must be replaced before
refacing valve seats.
If valve seat is wider than 0.05 - 0.06” (1.2 - 1.6mm)
(A, Figure 18), a narrowing cutter should be used to
ensure that contact area of valve seat is centered
on face of valve.
Figure 18
• Use a 45° (B) cutter to narrow seat from
bottom.
• Use a 15° (C) cutter to narrow seat from
top.
NOTE: If valve seat is loose or cracked, replace
cylinder head.
12. Measure valve stem diameter at specified
distance from end of valve (A, Figure 19).
• Replace IN if less than 0.2343 in. (5.952
mm).
• Replace EX if less than 0.2342 in. (5.948
mm).
Figure 19
13. Inspect valve stem cap for wear (Figure 20).
Replace if cap is worn recessed.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vanguard 3-Cylinder OHV Liquid-Cooled Gasoline at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vanguard 3-Cylinder OHV Liquid-Cooled Gasoline in the language / languages: English as an attachment in your email.

The manual is 10,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info