794661
59
Zoom out
Zoom in
Previous page
1/72
Next page
© TIMYO B.V. TIMYO USER MANUAL EN SKO52021V2 PAGE 59
MANUAL VANDIJCK E-BIKES VD0.1
5.8.25 Magnet Quantity Settings
“n” represents magnet numbers of PAS disk. The default value
is 6. Press the " " or " " to select the amount to change magnet numbers of
PAS disc. Press and hold " " for 2s to confirm and return to the previous menu.
5.8.26 Speed sensor settings (optional)
"SPS"stands for speed sensor settings. The default value is 1 Press the " " or
" " to select the amount of magnetic heads (the range is from 1 to 15). Hold
" " for 2s to confirm and then return to the previous menu.
5.8.27 Gear functions (optional)
"HL" stands for throttle push-assist function. HL-N means that the push function
for throttle is disabled. HL-y means that the push function of the throttle assistant
is enabled. The default value is N. Press the " " or " " button to select Y or
N to set the push-assist functions of the throttle. Hold " " for 2s to confirm
and then return to the previous menu. Otherwise you want to select N and then
access the throttle pedal level setting to switch it on or off
5.8.28 Gear level on/off
"HF-y" means that the gas velocity is limited by the current PAS level, while "HF-
n" means that the gas velocity is not restricted by the current PAS level. The
default value is n. If you select y, the maximum speed can only be the highest
speed driven by the current PAS level when you turn the throttle. If you select n,
the maximum speed is not limited by the current PAS level shown on the display
and you reach the nominal maximum speed immediately when you twist the
accelerator pedal. Press " " or " " to set Y or N and press " " to confirm
and return to the enable/disable setting interface or hold " " for 2s to return
to the previous menu interface.
5.8.29 Battery power delay settings
"DLY" stands for delay time of the battery. The default value is 3s. Press button
" " or " " to select delay time 3s,6s,12s to change the settings. Press " " to
confirm and then access the maximum speed limit settings.
5.8.30 Maximum speed limit settings
"MAX SPD"stands for maximum speed limit settings. The default value is 25 Km/h.
Press " " or " " to set the maximum speed from 12 km/h to 25 km/h. Press
" " to confirm and then access push-assist settings.
The maximum speed is set by the display manufacturer.
!
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Van Dijck Timyo E-pack at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Van Dijck Timyo E-pack in the language / languages: English as an attachment in your email.

The manual is 17.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Van Dijck Timyo E-pack

Van Dijck Timyo E-pack User Manual - German - 72 pages

Van Dijck Timyo E-pack User Manual - Dutch - 72 pages

Van Dijck Timyo E-pack User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info