821523

Valera Valera SwissX - SUPER Brush Shine Set Manual

4
Zoom out
Zoom in
Previous page
1/82
Next page
8
from the power supply socket. Do not pull on the wire to
remove the plug from the power supply socket. Do not
pull the plug out of the power supply socket when your
hands are wet.
•Always allow the unit to cool before putting it away and
never wrap the cord around the unit.
•Check that the cord has not been damaged from time to
time.
•Prevent the cord from coming into contact with the metal
parts while these are still hot.
•Use the unit on dry hair.
•Do not use this unit on wigs that have synthetic hair.
•The elements used to pack the unit (plastic bags,
cardboard box, etc.) must be kept out of reach of children
as they are a potential danger to them.
•This unit must only be used for the purposes for which it
is expressly intended. Any other use is to be considered
improper and therefore dangerous. The manufacturer
accepts no responsibility for damage caused by improper
or erroneous use.
•Do not use hair spray while the unit is running.
•Keep the plates clean and free of dust, hair spray, styling
gel, etc.
•To avoid dangerous overheating, it is advisable to unwind
the entire length of the cord.
•The A-weighted sound pressure level of the hair
straighteners for professional use is below 70 dB(A).
•Designation of the appliance (see technical product
specifications)
HAND-HELD HAIR STRAIGHTENER FOR PROFESSIONAL
USE
OPERATING INSTRUCTIONS
PARTS
1.Appliance
2.Straightening plates
3.ON-OFF switch
4.Temperature adjustment controls (Type 100.20/IS,
100.20/I, 100.20, 100.30/IS, 100.30/I, 100.30, 100.11/IS,
100.11/I, 100.11)
5.Temperature selector (Type 100.02/I, 100.02, 100.05/I,
100.05)
6.Indicator light (Type 100.02/I, 100.02, 100.05/I, 100.05)
7.Display (Type 100.20/IS, 100.20/I, 100.20, 100.30/IS,
100.30/I, 100.30, 100.11/IS, 100.11/I, 100.11, )
8.X’Brush accessory (for models supplied with this
accessory
9.Thermocap accessory
10. Heat-resistant carry pouch (for models supplied with this
accessory)
Fig. 8.
Switching the appliance
on and off
Type 100.20/IS, 100.20/I, 100.20, 100.30/IS,
100.30/I, 100.30, 100.11/IS, 100.11/I, 100.11,
100.02/I, 100.02, 100.05/I, 100.05
To switch the appliance on, simply plug it in to an electrical
socket, then press and hold the ON-OFF switch (fig. 1, ref. 3)
for one second. To switch it off, press and hold the ON-OFF
button (fig. 1, ref. 3) for one second again and remove the
plug from the socket.
°C °F
Temperature settings
Type 100.20/IS, 100.20/I, 100.20, 100.30/IS,
100.30/I, 100.30, 100.11/IS, 100.11/I, 100.11
To select the operating temperature, switch on the appliance
and press the “+” or “-” control (fig. 1, ref. 4) until the display
(fig. 1, ref. 7) shows the desired temperature.
Different temperatures may be selected for different hair types
at intervals of 10°C, from a minimum of 120°C to a maximum
of 230°C.
After the selected value has been blinking for a few seconds,
the display (fig. 1, ref. 7) will show the actual temperature of
the straightening plates (fig. 1, ref. 2). When the temperature
of the straightening plates is lower than 110°, 3 dashes flash
on the display.
Wait for the selected temperature to be reached, then begin
styling the hair.
Type 100.02/I, 100.02, 100.05/I, 100.05
Select the desired temperature using the corresponding wheel
(fig. 1, ref. 5): when the LED (fig. 1, ref. 6) stops blinking, the
appliance is ready to use.
AUTOMATIC DEACTIVATION
OF SAFETY
and “HOT” FUNCTION
The appliance automatically switches off 60 minutes after it
was switched on:
- in 100.20/IS, 100.20/I, 100.20, 100.30/IS, 100.30/I,
100.30, 100.11/IS, 100.11/I, 100.11 models, 5 minutes
before automatic deactivation, the display (fig. 1, ref. 7)
shows the temperature and the text “off” alternately.
When 60 minutes have elapsed, if the power button (fig. 1, ref.
3) has not been pressed again, the straightening plates (fig. 1,
00060714 int_mar2017:Layout 1 07/03/2017 9.20 Pagina 8
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Valera Valera SwissX - SUPER Brush Shine Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Valera Valera SwissX - SUPER Brush Shine Set in the language / languages: All languages as an attachment in your email.

The manual is 1.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info