814533
5
Zoom out
Zoom in
Previous page
1/96
Next page
5
Model 543., 545., 560., 561., 566., 581., 583., 584., 585., 586., 587..
Fan Setting Temperature setting
0=Off 1=tiepid air (=COOL model 543.., 545.., 561..)
1=low power 2=warm (=1/ECO model 543.., 545.., 561..)
2=high power 3=hot (=2/MAX model 543.., 545.., 561..)
Mod. 583.11/P, 583.10, 584.02/IP, 584.03/P., 585.., 586.., 587..
ON=On/Off (pressure must be maintained to operate
the hairdryer)
Fan Setting Temperature setting
0=Off 1=tiepid air
1=low power 2=warm
2=high power 3=hot
COOL or COLD function
(for hairdryers fitted with this device) - Fig. 2
This function is used to set hair waves after styling.
eQ-AIRcontroller function (for hairdryers fitted with this device)
Any appliance operating faults are indicated by means of an LED
(Fig. 3).
Important
This hairdryer conforms to the safety regulations regarding
electrical appliances.
This hairdryer has a safety cut-out which will operate in case
of overheating. The dryer will re-set itself after being left to
cool for a few minutes, but please check air inlet and outlet
grills are perfectly clean before continuing to use the dryer.
This appliance conforms to European Directives 2014/30/EU,
2014/35/EU, 2011/65/EU, 2015/863/EU, 2009/125/EC,
2012/19/EU and Regulation (EC) No. 1275/2008.
OPERATING INSTRUCTIONS
Switching (only if applicable to the model purchased)
Model 530.., 533.., 541.., 542.., 553.., 554..
ON=
ON/OFF Pressure must be maintained to operate the
hairdryer)
0=Off
COOL=
tepid air
1=warm/low power
2=hot/high power
Do not try to recover an electric appliance fallen into water, but
unplug it immediately from the mains supply.
Turn the unit off when you put it down.
Unplug the appliance when not in use, but never do it by pulling the
cord.
Remember to check regularly that the air inlet and outlet grills are clean.
Allow your appliance to cool before storing away and do not wrap
the supply cord around the hairdryer in storage.
This unit must only be used for the purposes for which it is
expressly intended. Any other use is to be considered improper
and therefore dangerous. The manufacturer accepts no
responsibility for damage caused by improperor erroneous use.
(Only for models 560.., 566.., 581.., 583.., 584..,585.., 586.., 587..)
This hairdryer is designed for professional use.
When set to maximum temperature values, the appliance produces
very hot air. To avoid damaging the hair or skin when using the
product in a domestic environment, select lower temperature
values or do not concentrate on individual areas for too long.
The A-weighted sound pressure level of the hairdryers for
professional use is below 70 dB(A).
Designation of the appliance (see technical product specifications)
HAND-HELD HAIR DRYER FOR PROFESSIONAL USE
ns
on, it is
on current
hich feeds
rician.
, shower,
er, and by
es or who
e suitably
and made
ocedures
d by the
person in
t working
elf, rather
use since
appliance
and make
me as that
nto water
00060819 2021_09_Layout 1 24/09/2021 15:01 Pagina 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Valera Swiss Silent Jet 8700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Valera Swiss Silent Jet 8700 in the language / languages: All languages as an attachment in your email.

The manual is 1.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info