469495
35
Zoom out
Zoom in
Previous page
1/208
Next page
33Operating manual for the auroMATIC 620 0020094404_00 Controller
5.7 Setting the holiday programme
For the controller and all system components connected
to it, you can set:
two holiday periods with start and end date,
the desired night set back temperature, i.e., the value
at which the heating installation is to be regulated
during the absence, independently of the specified
timer programme.
The holiday programme starts automatically when a
preset holiday period begins. The holiday programme
ends automatically after the holiday period has elapsed.
The heating installation is once more regulated accor-
ding to the previously set parameters and the selected
operating mode.
i
You can only activate the holiday programme
in the operating modes Auto and Eco.
Connected cylinder charging circuits or circu-
lation pump circuits are automatically swit-
ched to OFF mode during the holiday timer
programme. Solar circuits in the operating
mode Auto are not affected
Before going away, check that the mode is set to
Auto or Eco.
If this is not the case, set them to Auto or Eco
(¬ Chap. 5.3.1).
Requirement: Menu
4 Holiday programme is dis-
played (¬ Chap. 5.1.1).
Holiday programming
4
for whole system
Periods
1
30. 02. 09 – 20. 03. 09
2
05. 05. 09 – 22. 05. 09
Room Temp. setpoint
15°C
>Set starting day
The parameters on a grey background can be set.
5.7.1 Setting time periods
Setting a date (Day.Month.Year) has already been
described at length when setting the date in the basic
data (¬ Chap. 5.4.2).
Set the Start month, Start day, Start year and the
End month, End day and End year in sequence for
time period 1, and also for time period 2 if required.
Proceed exactly as was described in Chap. 5.4.2 for
month, day and year.
>
>
>
5.7.2 Setting the target temperature
Always observe the information on frost protec-
tion (¬ Chap. 5.15).
Holiday programming
4
for whole system
Periods
1 20. 08. 09 – 28. 08. 09
2 05. 09. 09 – 22. 09. 09
Room Temp. setpoint
15°C
>Select target room temperature
Turn the right hand knob until the cursor
is
flashing in front of the Target temperature.
Holiday programming
4
for whole system
Periods
1 20. 08. 09 – 28. 08. 09
2 05. 09. 09 – 22. 09. 09
Room Temp. setpoint
15°C
>Select target room temperature
Press the right hand knob.
The target temperature is marked.
Holiday programming
4
for whole system
Periods
1 20. 08. 09 – 28. 08. 09
2 05. 09. 09 – 22. 09. 09
Room Temp. setpoint
16°C
>Select target room temperature
Turn the right hand knob until the desired target
temperature is displayed.
Holiday programming
4
for whole system
Periods
1 20. 08. 09 – 28. 08. 09
2 05. 09. 09 – 22. 09. 09
Room Temp. setpoint
16°C
>Select target room temperature
Press the right hand knob.
The target temperature is saved.
The room temperature will be automatically reduced to
this target temperature during the set holiday periods.
After an extended period without any operations, the
display automatically reverts to the graphic display.
>
>
>
>
>
Operation 5
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant VRS 620-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant VRS 620-3 in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vaillant VRS 620-3

Vaillant VRS 620-3 User Manual - German - 52 pages

Vaillant VRS 620-3 User Manual - Dutch - 204 pages

Vaillant VRS 620-3 User Manual - French - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info