469496
11
Zoom out
Zoom in
Previous page
1/24
Next page
11Gebruiksaanwijzing en installatiehandleiding mengmodule VR 61
Teken de beide bevestigingspunten volgens de
bevestigingsopeningen (1) op de juiste plaats af.
Boor twee gaten voor de overeenkomstige pluggen
en schroef de behuizing
vast.
De elektrische installatie geschiedt zoals
beschreven in hfdst. 6.
Plaats het behuizingsdeksel onder weer in de
scharnieren en klap het behuizings- deksel omhoog.
Schroef het behuizingsdeksel conform afb. 5.1 vast.
5.3 Standaardvoeler VR 10 monteren
De standaardvoeler VR 10 is zodanig uitgevoerd dat deze
naar keuze als boilervoeler (b.v. als dompelvoeler in een
boilervoelerbuis) of als aanvoervoeler
(b.v. in de open verdeler) gebruikt kan worden.
Met de meegeleverde spanband kan de VR 10 ook als
contactvoeler op een CV-buis bevestigd worden. Wij
adviseren de buis met voeler te isoleren, om de best
mogelijke temperatuurregistratie te waarborgen.
Afb. 5.3 Standaardvoeler VR 10 als contactvoeler
6 Elektrische installatie
De elektrische aansluiting mag alleen worden uitgevoerd
door een erkend installateur die verantwoordelijk is voor
het naleven van de bestaande normen en richtlijnen.
e
Gevaar!
Spanningvoerende aansluitingen!
Bij werkzaamheden in de geopende mengmodule
VR 61 en in de schakelkast van het CV-toestel
bestaat levensgevaar door een elektrische
schok.
Vóór werkzaamheden aan de mengmodule VR 61
en in de schakelkast van het CV-toestel de
stroomtoevoer uitschakelen en beveiligen tegen
opnieuw inschakelen.
De LED (groen) op de printplaat van de
mengmodule VR 61 mag niet branden.
Als de behuizing van de mengmodule VR 61 gesloten is,
open deze dan zoals beschreven in hfdst. 5.2 .
6.1 Mengmodule VR 61 aansluiten
De netvoeding geschiedt op de montageplaats naar de
mengmodule VR 61.
De eBUS-verbinding naar de mengmodule VR 61 kan op
een willekeurige plaats van het eBUS-systeem vertakt
worden (zie afb. 6.1).
Voer de aansluitbedrading van de mengmodule
VR 61 conform afb. 6.2 uit.
h
Aanwijzing!
De kabels voor de 230V-netaansluiting en voor
de e-BUS-verbinding zijn niet bij de levering
inbegrepen.
De boilervoeler 1 (SP1, toebehoren VR 10) wordt
op de kabelboom van het CV-toestel
aangesloten (zie aanvullend geldende
documenten, installatiehandleiding CV-toestel).
Dit geldt ook, wanneer de boilerlaadpomp direct
op de mengmodule VR 61 aangesloten wordt.
Bij de installatie van een open verdeler wordt de
aanvoervoeler 1 (VF1, toebehoren VR 10) in de
aanvoer achter of in de open verdeler
gemonteerd. De aansluiting geschiedt via de
printplaatstekker X8 (is bij de regelaar VRC
430 of VRC 430f meegeleverd) in de
schakelkast van het CV-toestel (zie afb. 6.3).
Montage 5
Elektrische installatie 6
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant VR 61 Mengmodule at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant VR 61 Mengmodule in the language / languages: Dutch as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info