748580

Vaillant ecoVIT exclusiv VKK 226-4 Manual

15
Zoom out
Zoom in
Previous page
1/16
Next page
Appendix
0020258609_00 ecoVIT exclusiv Operating instructions 15
Symptom Possible cause Measure
No hot water, heating stays cold Fault during the ignition pro-
cess. F.28 "No ignition during
start-up" or F.29 "Flame goes
out during operation" appears
in the display. The symbol is
shown in the display.
1. Check whether the gas stopcock is open.
2. If the gas stopcock is closed, open the gas stopcock with the
agreement of an installation company.
3. Press and hold the reset button for one second to cancel
ignition switch-off after three unsuccessful attempts if the
burner has so far failed to ignite.
4. If the product does not start up after three reset attempts,
contact an approved heating specialist company.
Fault in the air/flue gas route
or condensate discharge. F.32
"Speed deviation too great" or
F.50 "Failure Siphon switch"
appears in the display. The
and symbols are shown in the
display.
1. Contact an approved heating specialist company.
Domestic hot water functioning
correctly; heating does not start
up
Control settings not correct 1. Compare the control settings with the specifications in the
control's operating instructions.
2. Correct the settings in accordance with the operating instruc-
tions for the control.
3. Contact an approved heating specialist company if you en-
counter problems when configuring the settings.
The rotary knob for the heating
flow temperature is not at the
clockwise end stop when the
control is connected
1. Check the setting of the rotary knob for the heating flow tem-
perature when the control is connected.
2. Turn the rotary knob for the heating flow temperature as far
as it will go clockwise.
Heating flow temperature set
incorrectly with no control con-
nected
1. Check the heating flow temperature setting.
2. Set the rotary knob for the heating flow temperature to the
required heating flow temperature with no control connected.
No hot water, heating function-
ing correctly
Control settings not correct 1. Compare the control settings with the specifications in the
control's operating instructions; the rotary knob for the cylin-
der temperature is at the clockwise end stop when the con-
trol is connected.
2. Correct the settings in accordance with the operating instruc-
tions for the control.
3. Contact an approved heating specialist company if you en-
counter problems when configuring the settings.
The rotary knob for the cylinder
temperature is not at the clock-
wise end stop when the control
is connected
1. Check the setting for the rotary knob for the cylinder temper-
ature when the control is connected.
2. Set the rotary knob for the cylinder temperature as far as it
will go clockwise when the control is connected.
The cylinder temperature is
set incorrectly with no control
connected
1. Check the cylinder temperature setting.
2. Set the rotary knob for the cylinder temperature to the re-
quired cylinder temperature with no control connected.
… 15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant ecoVIT exclusiv VKK 226-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant ecoVIT exclusiv VKK 226-4 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vaillant ecoVIT exclusiv VKK 226-4

Vaillant ecoVIT exclusiv VKK 226-4 User Manual - German - 20 pages

Vaillant ecoVIT exclusiv VKK 226-4 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info