748574

Vaillant ecoTEC pure VCW 206-7-2 Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
4 Function
10 Operating instructions ecoTEC pure 0020258017_00
Button Meaning
+
– Calling up the additional func-
tions
or
– Navigating between individual
menu items
– Increasing or decreasing the
chosen set value
– On/off button (press and hold
the button for < 3 s)
– Reset button (press and hold
the button for > 3 s)
Both selection buttons have a soft key
function, i.e. their function can change.
If, for example, you press the left-hand
selection button in the basic display,
the current function switches from (Do-
mestic hot water temperature) to (Back).
Adjustable values are always displayed as
flashing.
You must always confirm a change to a
value. Only then is the new setting saved.
You can press to cancel a procedure at
any time. If you do not press any buttons
for longer 15 minutes, the display returns
to the basic display.
4.1.1 Basic display
The basic display shows the current
product status.
To return to the basic display, press the
button. If you do not press any buttons
within three minutes, the display becomes
dark and automatically switches back to
the basic display.
If an error message appears, the error
code will be shown on the basic display.
The available functions vary depending on
whether:
– A room thermostat is connected to the
product or not
– A domestic hot water cylinder with tem-
perature sensor is connected to the
product or not
4.1.2 Operating levels
The product has two operating levels:
– The operator level shows the most im-
portant information and offers set-up
options which do not require any special
prior knowledge.
– Specialised knowledge is required in or-
der to use the installer level (access for
competent persons). This is therefore
protected by an access code.
Operator level – overview (→ Page 17)
4.2 Opening the isolator devices
1. Ask the competent person who in-
stalled the product to explain to you
where these isolator devices are loc-
ated and how to handle them.
2. Open the gas isolator cock installed
on-site.
3. Open the gas isolator cock, which is
directly below the product or in its im-
mediate vicinity.
4. Open the service valves in the heating
installation's flow and return.
5. Open the cold water stop valve.
4.3 Switching on the product
1. Only start up the product once the cas-
ing has been completely closed.
2. If the display is switched off, press
for less than 3 seconds.
◁ The basic display is shown in the
display.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant ecoTEC pure VCW 206-7-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant ecoTEC pure VCW 206-7-2 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vaillant ecoTEC pure VCW 206-7-2

Vaillant ecoTEC pure VCW 206-7-2 User Manual - German - 20 pages

Vaillant ecoTEC pure VCW 206-7-2 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info