748573
18
Zoom out
Zoom in
Previous page
1/20
Next page
Appendix
18 Operating instructions ecoTEC pure 0020258017_00
Status code Meaning
S.46 Protection mode: Minimum load
C Troubleshooting and fault elimination
C.1 Troubleshooting
Symptom Possible cause Measure
The system pres-
sure is flashing on the
display
The system pressure
is too low: < 0.05 MPa
(< 0.50 bar). Low wa-
ter pressure in the
heating installation.
Fill the heating installation. ( Page 13)
The system pressure
is too high: > 0.3 MPa
(> 3 bar).
Wait until the excess heating water has
flowed out through the expansion relief
valve.
Product does not start
up (no hot water,
heating remains cold)
The gas isolator cock
installed on-site and/or
the gas isolator cock
on the product is
closed.
Open both gas isolator cocks.
The cold water stop
valve is closed.
Open the cold water stop valve.
The product is
switched off.
Switch on the product. ( Page 10)
The heating flow tem-
perature/hot water
temperature has been
set too low and/or the
heating mode/hot wa-
ter generation has
been switched off.
1. Set the heating flow temperature.
2. Set the hot water temperature.
There is air in the
heating installation.
Have a competent person purge the heating
installation.
Hot water generation
functioning correctly;
heating does not start
up
The external controller
is not set correctly.
Set the external controller correctly (Con-
troller operating instructions).
C.2 Rectifying faults
Message Possible cause Measure
F.28 Ignition unsuc-
cessful
After three unsuc-
cessful ignition at-
tempts, the product
has switched to fault
mode.
1. Check whether the gas isolator cock is
open.
2. Press the reset button for longer than
three seconds.
3. If you have been unable to eliminate the
ignition fault after the fault clearance at-
tempt, consult a competent person.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant ecoTEC pure VC 146-7-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant ecoTEC pure VC 146-7-2 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vaillant ecoTEC pure VC 146-7-2

Vaillant ecoTEC pure VC 146-7-2 User Manual - German - 20 pages

Vaillant ecoTEC pure VC 146-7-2 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info