579078
11
Zoom out
Zoom in
Previous page
1/24
Next page
Bediening 5
0020144292_00 ecoTEC plus Gebruiksaanwijzing 11
5.2.2 Product inschakelen
50
1
2
Druk op de aan-/uittoets (1).
Als het product ingeschakeld is, dan verschijnt op het
display (2) het "startscherm" ( Pagina 10).
5.2.3 Vuldruk van de CV-installatie controleren
Aanwijzing
Om het gebruik van de installatie met een te
kleine hoeveelheid water te vermijden en om
te voorkomen dat daardoor schade ontstaat,
beschikt uw product over een druksensor en
een digitale drukindicatie.
Voor een perfecte werking van de CV-installatie
moet de vuldruk bij een koude CV-installatie
tussen 0,1 MPa en 0,2 MPa (1,0 bar en 2,0 bar)
resp. tussen de beide gestippelde lijnen in de
balkindicatie liggen.
Als de CV-installatie zich over meerdere etages
uitstrekt, kan een hogere vuldruk van de CV-
installatie nodig zijn. Vraag hiervoor raad bij uw
installateur.
Aanwijzing
Bij het onderschrijden van 0,08 MPa (0,8 bar)
knipperen op het display de rechter balkindica-
tie en de actuele vuldruk.
Bijkomend wordt na ca. een minuut het symbool
weergegeven.
Als de vuldruk van de CV-installatie onder 0,05
MPa (0,5 bar) daalt, dan schakelt het product
uit. Op het display verschijnen afwisselend de
foutmelding F.22 en de actuele vuldruk.
1,0
Waterdruk
Vorige
0,8 3,0
1
2
3
1 Actuele vuldruk
2 Maximale vuldruk
3 Minimale vuldruk
1.
Druk twee keer op .
Op het display verschijnen de waarden van de ac-
tuele vuldruk (1) alsook van de minimale (3) en de
maximale (2) vuldruk.
2. Als de vuldruk te laag is, dan vult u water bij.
Zodra u voldoende water hebt bijgevuld, verdwijnt de
weergave na ca. 20 seconden vanzelf.
3. Als de druk vaker daalt, moet de oorzaak voor het ver-
lies van CV-water worden vastgesteld en verholpen.
Breng hierover uw installateur op de hoogte.
5.2.4 CV-installatie vullen
Opgelet!
Risico op materiële schade door sterk
kalkhoudend, sterk corrosief of met che-
micaliën vervuild verwarmingswater!
Ongeschikt leidingwater beschadigt afdich-
tingen en membranen, verstopt waterdoor-
stroomde componenten in het product en
in de CV-installatie en veroorzaakt gelui-
den.
Vul de CV-installatie alleen met geschikt
CV-water.
Vraag bij twijfel hiervoor raad bij een
installateur.
1. Vraag een installateur waar de vulkraan zich bevindt.
2. Verbind de vulkraan met de warmwatervoorziening, in-
dien mogelijk met een koudwaterkraan, zoals de instal-
lateur het u uitgelegd heeft.
3. Open alle thermostaatkranen van de CV-installatie.
4. Open de koudwaterkraan.
5. Draai de vulkraan langzaam open.
6. Vul water bij tot de vereiste vuldruk bereikt is.
7. Sluit de koudwaterkraan.
8. Ontlucht alle radiatoren.
9. Controleer daarna de vuldruk aan het display.
10. Vul evt. nog eens water bij.
11. Sluit de vulkraan.
12. Keer naar het "startscherm" ( Pagina 10) terug.
5.3 CV-aanvoertemperatuur instellen
5.3.1 CV-aanvoertemperatuur instellen (zonder
aangesloten thermostaat)
Aanwijzing
Als er geen externe of interne thermostaat aan
het product aangesloten is, stel dan de CV-aan-
voertemperatuur zoals hierna beschreven in.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant ecoTEC plus VCW 296 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant ecoTEC plus VCW 296 in the language / languages: Dutch as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info