602548
50
Zoom out
Zoom in
Previous page
1/72
Next page
5 Flat roof fitting and installation
50 Installation manual auroTHERM exclusive 0020077994_02
Placing load weights on load plates
Transport the required number of loading weights to
the flat roof.
Place the load weights on the load plates as shown
above.
Ensure that the distance between the loading weights
and the racks is as small as possible.
Danger!
Risk of death due to inadequate fasten-
ing of the load weights onto the load
plates!
If the load weights are inadequately se-
cured on the load plates, collectors could
fall from the roof and cause life-threaten-
ing accidents.
Secure all load weights on the load
plates adequately against slipping and
tilting.
Distribute the load weights evenly over the load plates.
Conditions: Type of installation: Floating installation (without load plates)
Preparing weights
Caution.
Lack of tightness due to destruction of
the roof skin.
In the event of destruction of the roof skin,
water may penetrate the building.
Ensure adequate protection of the roof
skin during installation on roof sealing
surfaces.
Place large-area, non-slip building pro-
tection mats underneath the installation
system.
If the roof is covered with gravel, remove the gravel at
the places where you wish to position the weights, and
use non-slip building protection mats to protect the roof
skin.
Define the required rack clearances as described in the
chapter "Defining rack clearances".
Note
For each rack, you need two equal weights.
For the first collector, you therefore need
four weights. For each additional collector,
you will need an additional rack.
Transport the required number of weights to the flat
roof.
Lay the weights in the final positions of the installation
site.
Note
The four weights for holding two racks for
a collector are very heavy. Therefore, it is
advisable to determine the final position and
orientation of the weights before screwing
on the rack and laying the weights there.
Select a suitable fastening material for the weights used
(diameter: at least 10 mm).
Drill a hole into the centre of each weight.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant auroTHERM exclusive VTK 570-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant auroTHERM exclusive VTK 570-2 in the language / languages: English as an attachment in your email.

The manual is 9,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vaillant auroTHERM exclusive VTK 570-2

Vaillant auroTHERM exclusive VTK 570-2 Installation Guide - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info