37327
36
Zoom out
Zoom in
Previous page
1/208
Next page
Operating manual for the auroMATIC 620 Controller 0020094404_0034
5.8 Setting the night set back temperature and
the heating curve
5.8.1 Setting night set back temperature
The night set back temperature is the temperature to
which the heating is regulated during the night set back
period (e.g., overnight). The night set back temperature
can be set individually for each heating circuit.
Requirement: Menu
5 HK1 parameters is displayed
(¬ Chap. 5.1.1).
HK1
5
Parameters
Night set back temp 15 °C
Heating curve
1,2
>Select target room temperature
Turn the right hand knob until the cursor
is
flashing in front of the Night set back temp.
HK1
5
Parameters
Night set back temp
15°C
Heating curve 1,2
>Select target room temperature
Press the right hand knob.
The Night set back temperature is marked.
HK1
5
Parameters
Night set back temp
16°C
Heating curve 1,2
>Select target room temperature
Turn the right hand knob until the desired Night
set back temperature is displayed.
i
If necessary, find out about the optimum set-
ting from your heating engineer.
>
>
>
HK1
5
Parameters
Night set back temp
16°C
Heating curve 1,2
>Select target room temperature
Press the right hand knob.
The Night set back temperature is saved.
Always observe the information on frost protection
(¬ Chap. 5.15).
5.8.2 Setting the heating curve
Your selection of heating curve will influence the flow
temperature of your heating.
b
Caution!
Material damage caused by high flow tem-
peratures with underfloor heating!
Flow temperatures above 40 °C can cause
material damage with underfloor heating.
Do not set the flow temperature above
40 °C if underfloor heating is in use.
The heating curve represents the relationship between
external temperature and the flow temperature. The
setting is made separately for each heating circuit
(¬ Chap. 3.4).
The room temperature of your heating installation
depends to a great extent on the selection of the right
heating curve. If the selected heating curve is too high,
the temperatures in the heating installation will also be
too high, resulting in higher energy consumption.
If the selected heating curve is too low, the desired tem-
perature level may only be reached after a while or not
reached at all.
HK1
5
Parameters
Night set back temp 16°C
Heating curve
1,2
> Select heating curve
Turn the right hand knob until the cursor
is
flashing in front of the Heating curve.
>
>
>
>
5 Operation
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant Auromatic 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant Auromatic 620 in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vaillant Auromatic 620

Vaillant Auromatic 620 User Manual - German - 52 pages

Vaillant Auromatic 620 User Manual - Dutch - 204 pages

Vaillant Auromatic 620 User Manual - French - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info