37327
32
Zoom out
Zoom in
Previous page
1/208
Next page
Operating manual for the auroMATIC 620 Controller 0020094404_0030
5 Operation
5.6 Setting the timer programmes
In Menu
3 Time programmes, you can set your own
time programmes for the heating circuits, the DHW
cylinders and the circulation pumps.
You can set up to three time windows (Start time to End
time) for each day or block (a block is, e.g., Mon–Fri).
Factory setting for the timer programmes:
Mon – Fri 5:30 – 22:00 hrs.
Sat 7:00 – 23:30
Sun 7:00 – 23:30
You can adapt these timer programmes to your needs.
Within a time window the heating is on. The regulation
is based on the target room temperature. Outside the
time window, the heating installation reduces the room
temperature to the night set back temperature.
There is a full sequence of displays for the timer pro-
grammes; these are identified by
3 at the top right of
the display. In all these displays (
3), Timer pro-
grammes appears in the 2nd display line.
The first line of the display shows what the timer pro-
gramme applies to (e.g. HK1, domestic hot water, circu-
lation pump).
HK1
3
Timer programmes
Mon-
Fri
1 06:00 - 09:30
2 16:30 - 21:30
3-
> Select day of week/block
More information regarding the settable parameters can
be found in Table 3.5 (¬ Chap. 3.11).
There are sub-menus for each day/block for each cir-
cuit. You can thus define different heating times for
each day according to your daily routine.
If a different time window has been programmed for
one day (e.g. Wed) within a block (e.g. Mon-Fri), Mon-Fri
--:-- will be is displayed. In this case you must set the
time windows for each day individually.
HK1
3
Timer programmes
Mon-Fri
1
––:–– ––:––
2 16:30 21:30
3 : :
> Select day of week/block
i
You can set the same time windows for the
DHW cylinder and the circulation pump.
i
When connecting to a solar cylinder it should
be noted that the time programme enables
the recharging function for the cylinder via
the heater.
The recharging function ensures that the solar cylinder
reaches a sufficiently high hot water temperature.
Default setting controller for charging the solar cylin-
der:
Day/block Times for recharging
Mon – Fri
Sat
Sun
5:30 – 22:00
7:00 – 23:30
7:00 – 22:00
5.6.1 Setting time windows
Take some time beforehand to plan your individual
time windows carefully.
The time windows are the time periods each day/
block during which you are at home and require heat
and hot water.
i
When you define the heating times for a
block (e.g. Mon–Fri), no settings are neces-
sary for the individual days within the block.
Requirement: Menu
1 Basic data is displayed
(¬ Chap. 5.1.1).
i
If your heating installation is configured with
several heating circuits, a DHW cylinder and a
circulation pump, turn the left hand
knob
until Menu
3 Time programme shows the
display for the heating circuit, DHW cylinder
or circulation pump for which you wish to set
the time programme.
The following example describes how to set a timer pro-
gramme for the weekend for heating circuit HK1.
HK1
3
Timer programmes
Mon-Fri
1 6:00 9:30
2 16:30 21:30
3 : :
> Select day of week/block
>
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant Auromatic 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant Auromatic 620 in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vaillant Auromatic 620

Vaillant Auromatic 620 User Manual - German - 52 pages

Vaillant Auromatic 620 User Manual - Dutch - 204 pages

Vaillant Auromatic 620 User Manual - French - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info