37327
26
Zoom out
Zoom in
Previous page
1/208
Next page
Operating manual for the auroMATIC 620 Controller 0020094404_0024
5.3.2 Setting the target room temperature using
heating circuit HK1 as an example
The target room temperature is used to calculate the
heating curve.
If you increase the required room temperature, the set
heating curve is moved parallel to a 45° axis and cor-
respondingly also the flow temperature to be regulated
by the controller (¬ Fig. 3.4).
Requirement: The display must show the basic display
(¬ Chap. 5.3).
Wed 02.12.09 15:43 -3 °C
HK1 Heating
22 °C
Storey 1 Eco 20 °C
Cylinder Off 60 °C
Solar Auto
>Select target room temperature
Turn the right hand knob until the cursor
is
flashing in front of the target room temperature
(22 °C in the example).
Wed 02.12.09 15:43 -3 °C
HK1
Heating
22 °C
Storey 1 Eco 20 °C
Cylinder Off 60 °C
Solar Auto
>Select target room temperature
Press the right hand knob.
The target room temperature is marked.
Wed 02.12.09 15:43 -3 °C
HK1 Heating
21°C
Storey 1 Eco 20 °C
Cylinder Off 60 °C
Solar Auto
>Select target room temperature
Turn the right hand knob until the desired target
room temperature appears on the display.
i
Choose the target room temperature so that
your heat requirements are covered exactly.
You will save energy and costs this way.
>
>
>
Wed 02.12.09 15:43 -3 °C
HK1 Heating
21°C
Storey 1 Eco
20 °C
Cylinder Off 60 °C
Solar Auto
>Select target room temperature
Press the right hand knob.
The changed target room temperature is saved and
takes effect.
Repeat the steps as required.
i
Set the target room temperatures for the
other heating circuits or the hot water tem-
perature for the cylinder in the same way.
Length of time the changed value remains effective
in the control system
If you have changed the target room temperature in the
basic display, the new value takes effect in the control
system.
The heating installation is controlled at the new target
room temperature during all the time windows:
immediately, if you have changed the target value
during one of the time windows,
at the start of the next time window, if you have
changed the target value outside one of the time win-
dows.
>
>
5 Operation
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vaillant Auromatic 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vaillant Auromatic 620 in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vaillant Auromatic 620

Vaillant Auromatic 620 User Manual - German - 52 pages

Vaillant Auromatic 620 User Manual - Dutch - 204 pages

Vaillant Auromatic 620 User Manual - French - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info