503144

V-Zug CCSSL60 Manual

18
Zoom out
Zoom in
Previous page
1/199
Next page
18
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until “ADJUST
TIME” is displayed;
3. Press the OK button (B4). The hours ash on the display;
4. Press the ▽ and △ buttons (B5 and B6) to change the
hours;
5. Press the OK button (B4) to conrm. The minutes ash on
the display;
6. Press the ▽ and △ buttons (B5 and B6) to change the
minutes;
7. Press the OK button (B4) to conrm;
8. Press the P / ESC button (B7) to exit the settings menu.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note:
To enable this function, the time must be set correctly.
To enable Auto-on, proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until “AUTO
START” is displayed;
3. Press the OK button (B4). “ENABLE?” is displayed;
4. Press the OK button (B4). The hours ash on the display;
5. Press the ▽ and △ buttons (B5 and B6) to choose the
hours;
6. Press the OK button (B4) to conrm. The minutes ash on
the display;
7. Press the ▽ and △ buttons (B5 and B6) to change the
minutes;
8. Press the OK button (B4) to conrm. “ENABLED” appears
under “AUTOSTART”.
9. Press the P/ ESC button (B7) to exit the menu.
To disable the function:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until “AUTO
START” is displayed;
3. Press the OK button (B4). “DISABLE?” is displayed;
4. Press the OK button (B4) to conrm;
5. Press the P/ ESC button (B7) to exit the menu. “DISABLED” is
displayed.
Auto-o (Standby)
The appliance is set by default to go o if not used for two
hours.
The time can be changed so that the appliance switches o after
15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-o, proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until “AUTOOFF”
is displayed;
3. Press the OK button (B4);
4. Press the ▽ and △ buttons (B5 and B6) until the required
time (15 or 30 minutes, or 1, 2 or 3 hours) is displayed;
5. Press the OK button (B4) to conrm;
6. Press the P/ ESC button (B7) to exit the menu.
Auto-o is programmed.
Setting the temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until “SET TEMPE
RATURE” is displayed;
3. Press the OK button (B4);
4. Press the ▽ and △ buttons (B5 and B6) until the required
temperature is displayed (l = low, llll = high);
5. Press the OK button (B4) to conrm;
6. Press the P/ ESC button (B7) to exit the menu.
Setting water hardness
The operating period can be extended if required, making desca-
ling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
• Removethe“TotalHardnessTest”strip(attachedtopage2)
from its packaging then dip it fully in the water for a few
seconds.
Remove and wait about 30 seconds (until it changes colour
and forms red squares).
• Turn the appliance on by pressing the ON/OFF/standby but-
ton (A7).
• Press the P / ESC button (B7) to enter the menu and then the
▽ and △ buttons (B5 and B6) until “WATER HARDNESS” is
displayed.
• Press the OK button (B4);
• Press the ▽ and △ buttons (B5 and B6) until the number
coincides with the number of red squares on the test strip
(for example, if there are 3 red squares on the test strip, se-
lect the message “WATER HARDNESS lll” .
• Press the OK button (B4) to conrm.
The coee machine is now programmed to provide the de-
scale warning when actually necessary.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for V-Zug CCSSL60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of V-Zug CCSSL60 in the language / languages: English, German, Dutch, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 26,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info