503143
19
Zoom out
Zoom in
Previous page
1/199
Next page
19
EN
Statistics function
This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the and buttons (B5 and B6) until STATISTICS
is displayed;
3. Press the OK button (B4);
4. By pressing the and buttons (B5 and B6), you can
check:
- how many coees have been made;
- how many milk drinks have been made;
- the total number of litres of water delivered.
- how many times the machine has been descaled.
5. Press the P/ ESC button (B7) twice to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the P /ESC button (B7) to enter the menu;
2. Press the and buttons (B5 and B6) until “DEFAULT
VALUES is displayed;
3. Press the OK button (B4);
4. CONFIRM?” is displayed;
5. Press the OK button (B4) to conrm and exit.
Descaling
Descale the machine when the message “DESCALE ashes on
the display.
Important!
Descaler contains acids which may irritate the skin and eyes.
It is vital to respect the manufacturer’s safety warnings given on
the descaler pack and the warnings relating to the procedure to
follow in the event of contact with the skin and eyes.
Please note:
Use lactic acid bacteria based descaler, for example De’Longhi
SKU: 5513214981.
Under no circumstances should you use sulphamic or acetic ba-
sed descalers. Their use invalidates the guarantee.
Failure to descale the appliance as described above also invali-
dates the guarantee.
1. Turn the machine on.
2. Enter the settings menu by pressing the P / ESC button (B7).
Press the and buttons (B5 and B6) until DESCALE is
displayed;
3. Press the OK button (B4) and CONFIRM?” is displayed,
press the OK button (B4) and pour the descaler.
4. Before conrming, empty the water tank completely
(A12).
Pour the descaler diluted with water (respecting the pro-
portions indicated on the descaler pack) into the water tank
and put the water tank back in the appliance.
Danger of burns!
Hot water containing acid ows out of the hot water spout.
Avoid contact with splashes of water.
5. Place an empty container with a minimum capacity of 1.5
litres under the hot water spout.
6. Conrm with the OK button (B4).
7. After conrming by pressing OK, the message DESCALING
UNDERWAY is displayed.
The descale programme starts and the descaler liquid co-
mes out of the water spout.
The descale programme automatically performs a series of
rinses and pauses to remove limescale deposits from inside
the machine.
After about 30 minutes, the message “RINSING FILL TANK” is
displayed.
8. The appliance is now ready for rinsing through with clean
water. Remove the water tank, empty, rinse under running
water, ll with clean water and replace.
RINSING PRESS OK is displayed.
9. Empty the container used to collect the descaler solution
and replace it under the hot water spout.
10. Press the OK button (B4) to start rinsing.
Hot water ows out of the spout and the message RINSING
PLEASE WAIT is displayed.
11. When the water tank is completely empty, the message
RINSING COMPLETE PRESS OK is displayed.
12. Press the OK button (B4). The appliance goes o automati-
cally.
TURNING THE APPLIANCE OFF
Each time the appliance is turned o, it performs an automatic
rinse cycle which cannot be interrupted.
Danger of burns! During rinsing, a little hot water
ows from the coee spouts.
Avoid contact with splashes of water.
To turn the appliance o, press the ON/OFF/standby button
(A7).
The appliance performs a rinse cycle then goes o.
Please note: If the appliance is not used for an exten-
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for V-Zug CCSSL6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of V-Zug CCSSL6 in the language / languages: English, German, Dutch, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 26,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info