550280
16
Zoom out
Zoom in
Previous page
1/72
Next page
1. Introduction to Galileo
14
1. Introduction to Galileo
interference-free line of communication
has to be established. This step has to be
performed only once for each transmitter
or when the battery in the transmitter is
replaced.
To pair Galileo to a transmitter proceed as
follows:
- Mounttherst-stageregulatorwiththe
Smart transmitter on a full tank.
- TurnonGalileo,ensureitisinthetime
of day display and place it in direct
contact with the transmitter.
- Openthetankvalve.
Uponpressurization,theSmarttransmitter
sends a pairing sequence to Galileo.
WhenGalileoreceivesthisinformation,the
displaychangestoshowalistingof2tank
designations. The tank designations are T1
and BUDDY. Tank T1 is your main tank.
The BUDDY designation allows you to
receive tank pressure information from your
divebuddy’sSmarttransmitter(ifequipped
with one) and to display it on the screen
of your Galileo (see chapter 3 for more
information).
Usethe”(left)and (middle)buttons
to select the tank that you want to assign
to the transmitter, then press SAVE”
(right button). Galileo will conrm the
pairing with the message PAIRING TO T1
SUCCESSFUL(orBUDDY).Ifyoudonot
wish to complete the operation, press and
hold the right button and Galileo will show
the message PAIRING CANCELLED. The
pairing will also be cancelled if you do not
press SAVE”within3minutes.
F
NOTE:
- The transmitter must have
been unpressurized for at least
40 seconds prior to the pairing
operation, else it will not transmit
the pairing sequence.
- A transmitter can only be paired
to one tank designation. If you pair
the same transmitter to a second
tank designation, the first one will
be erased. However you can pair
more than one Galileo to the same
transmitter.
- Pairing between Galileo and a
transmitter can be removed via
SmartTRAK.
AfterasuccessfulpairingofT1toGalileo,
the display will show the tank pressure in
either BAR or PSI.IftankT1hasnotbeen
paired, Galileo will show NO P instead of a
pressure value.If T1has been pairedbut
Galileo is not receiving any signal, it will
show---insteadofapressurevalue.
Onthesurface,thestatusoftheBUDDY
tank is shown in the gas summary table,
discussedinsection1.12.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UWATEC Galileo Luna at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UWATEC Galileo Luna in the language / languages: English as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of UWATEC Galileo Luna

UWATEC Galileo Luna Additional guide - English, German - 82 pages

UWATEC Galileo Luna User Manual - German - 78 pages

UWATEC Galileo Luna User Manual - Dutch - 76 pages

UWATEC Galileo Luna Additional guide - Dutch, French, Italian, Spanish - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info