550271

UWATEC Aladin Tec Manual

32
Zoom out
Zoom in
Previous page
1/48
Next page
32
3 Preparation for a dive with microbubble levels (MB levels)
V UWATEC
®
Aladin
®
dive computers
3.1 Setting the MB level
To change the MB level Aladin
®
TEC must be in user mode (time of day display).
1. Push or until the symbol for MB levels appears.
2.
Confirm that you wish to change the displayed MB level by
pushing .
3. Change MB level by pushing or .
4. Confirm the selected MB level with .
Without confirmation the display will disappear after 3 minutes and your
entries will not be accepted.
Aladin
®
TEC will display the symbol to confirm that an MB level beyond L0
(L1-L5) has been chosen. During the dive the MB level is shown by pressing 2x
. If however a level stop is ignored, the new MB level is shown (->33).
MB levels have an influence on the dive planner.
4 Functions during the dive with microbubble levels
4.1 Level stop information
Microbubble (MB) no-stop time
While diving with MB levels L1 to L5 Aladin
®
TEC will display the MB no-stop time instead of the ordinary
no-stop time. Within the MB no-stop time no level stops are required.
"NO STOP" and the MB level symbol are visible. The remaining MB no-stop time is shown in minutes.
• Information and alarms for MB no-stop time and ordinary no-
stop time are the same (->24).
• No-stop time relative to L0 is shown by pressing 3x
(see )
• Regardless of the MB level, we generally recommend to perform
a slow ascent during the last few metres / feet.
(Max. depth >) Temperature
> MB level active
> No-stop time relative to L0
> Temperature and time of day
> (Max. depth)…
Level stop
On entering the level stop phase,
"NO STOP"
disappears and the arrow
appears. The arrow flashes for 8 seconds and an audible alarm goes off.
To complete the dive without being reduced to a lower MB level, all requested
level stops must be observed.
The deepest level stop is displayed in metres (feet). The display <2: 3m> (<2: 10ft >)
means that a level stop of 2 minutes at a depth of 3 metres (10ft) has to be
observed. Deco information relative to L0 is shown on an alternate display
(see ).
When a level stop has been finished, the next higher level stop – if present – is
displayed. When all level stops have been observed, the arrow extinguis-
hes and "NO STOP" reappears. The indication of time shows the MB no-stop
time again.
(Max. depth >) Temperature > MB level active
> No-stop time or deco information relative to L0
> Temperature and time of day
> (Max. depth)…
STOP
STOP
STOP
DEPTHDEPTH
NO STNO STOPOP
DIVE DIVE TIMETIME
STOPSTOP
NO
CNS O
2
%
DEPTHDEPTH
DIVE DIVE TIMETIME
MB no-stop time
Deepest level
stop depth
Total time
of ascent
Level stop
duration
Level stop icon
or
until
Nitrogen loading bar
relative to L0
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UWATEC Aladin Tec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UWATEC Aladin Tec in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info