550273
46
Zoom out
Zoom in
Previous page
1/54
Next page
Setting the safety stop duration
1. Confirm that you wish to change the duration of the safety stop by pushing
. The duration starts to flash.
2. Change the duration in increments of 1 minute by pushing or .
3. Confirm the selected duration with .
Setting the maximum partial pressure of oxygen (ppO
2
max
)
1. Confirm that you wish to change the ppO
2
max
by pushing . The current
value starts to flash.
2. Change the value in increments of 0.05bar by pushing or .
3. Confirm the selected value with .
The ppO
2
max
setting is valid for gas 1 and the deco gas.
Setting the time limit to reset the O
2
% mix to air
1. Confirm that you wish to change the time limit of the reset
by pushing
. The current setting starts to flash.
2. Change the time limit by pushing or .
(1 - 48hrs o
r no reset: "– – h")
3. Confirm the selected value with .
Enabling two-gas diving
1. Confirm that you wish to enable two-gas diving by pushing
.
"On" or "off"
starts to flash.
"On" indicates the deco gas is active, "off" indicates that only gas 1 will be used
for decompression calculations.
2. Switch between "on" and "off" with .
3. Confirm your choice with .
Selecting the units
1. Confirm that you wish to change the units by pushing . The selected units
are displayed (m / ft / °C / °F).
2. Push . "m" or "ft" starts to flash.
3. Switch with between "m" and "ft".
4. Confirm the selected unit with . "°C" or "°F" starts to flash.
5. Switch with between "°C" and "°F".
6. Confirm the selected unit with .
Selecting the water type
1.
Confirm that you wish to change the selected water type by pushing .
"On"
or "off" starts to flash.
"Salt on" indicates salt water, "salt off" indicates fresh water.
2. Switch with between "salt on" and "salt off".
Confirm the water type with .
46
IX Settings
IX UWATEC Aladin TEC 2G
Duration of the safety stop
ppO
2
max
Time limit to reset O
2
mix
to air
Setting the dive time alarm
1. Confirm that you wish to change the time of the dive time alarm or to switch it
on or off by pushing . The alarm time starts to flash.
2. Change the alarm time in increments of 5 minutes by pushing or .
3. Confirm the selected alarm time with .
"
On
"
or
"
Off
"
starts to flash.
4.
"
On
"
indicates
"
activated
"
,
"
Off
"
indicates
"
deactivated
"
.
Switch between
"
on
"
or
"
off
"
by pressing .
Confirm the selected status with . See also page 22.
DEPTH
DIVE TIME
Alarm timeStatus
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UWATEC Aladin TEC 2G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UWATEC Aladin TEC 2G in the language / languages: English as an attachment in your email.

The manual is 6,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of UWATEC Aladin TEC 2G

UWATEC Aladin TEC 2G User Manual - German - 54 pages

UWATEC Aladin TEC 2G User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info