550273

UWATEC Aladin TEC 2G Manual

34
Zoom out
Zoom in
Previous page
1/54
Next page
34
3 Preparation for a dive with MB levels
V UWATEC Aladin TEC 2G
3.1 Setting the MB level
To change the MB level Aladin must be in user mode (time of day display).
1. Push or until the symbol for MB levels appears.
2.
Confirm that you wish to change the displayed MB level by
pushing .
3. Change MB level by pushing or .
4. Confirm the selected MB level with .
Without confirmation the display will disappear after 3 minutes and your entries
will not be accepted.
Aladin will display the symbol to confirm that an MB level beyond L0
(L1-L5) has been chosen. During the dive the MB level is shown by pressing 2x
. If however a level stop is ignored, the new MB level is shown (->35).
MB levels have an influence on the dive planner.
4 Functions during the dive with MB levels
4.1 Level stop information
MB no-stop time
While diving with MB levels L1 to L5 Aladin will display the MB no-stop time instead of the ordinary no-stop
time. Within the MB no-stop time no level stops are required.
"NO STOP" and the MB level symbol
are visible. The remaining MB no-stop time is shown in minutes.
• Information and alarms for MB no-stop time and ordinary no-
stop time are the same (->26).
• No-stop time relative to L0 is shown by pressing 3x
(see )
• Regardless of the MB level, we generally recommend to perform
a slow ascent during the last few metres / feet.
Level stop
On entering the level stop phase,
"NO STOP"
disappears and the arrow
STOP
appears. The
STOP
arrow flashes for 8 seconds and an audible attention beep
goes off. To complete the dive without cascading to a lower MB level, all
requested level stops must be observed.
The deepest level stop is displayed in metres (feet). The display "2: 3m "
("2: 10ft") means that a level stop of 2 minutes at a depth of 3 metres (10 feet) has
to be observed. Deco information relative to L0 is shown on an alternate display
(see ).
When a level stop has been finished, the next higher level stop – if present
– is displayed. When all level stops have been observed, the arrow
STOP
extinguishes and "NO STOP" reappears. The indication of time shows the MB
no-stop time again.
DEPTH
NO STOP
DIVE TIME
STOP
NO
CNS O
2
%
DEPTH
DIVE TIME
MB no-stop time
Deepest level
stop depth
Total time
of ascent
Level stop
duration
Level stop icon
or
until
Nitrogen loading bar
relative to L0
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UWATEC Aladin TEC 2G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UWATEC Aladin TEC 2G in the language / languages: English as an attachment in your email.

The manual is 6,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of UWATEC Aladin TEC 2G

UWATEC Aladin TEC 2G User Manual - German - 54 pages

UWATEC Aladin TEC 2G User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info