96
1 Maintenance
VIIIUwatec
®
Aladin
®
Air Z O
2
Your Aladin
®
Air Z O
2
is virtually maintenance free. All you need to do is to rinse it carefully with fresh
water after each use and to have the batteries changed when needed. To avoid possible problems with
your Aladin
®
Air Z O
2
, the following recommendations will help assure that it will give you years of trouble
free service:
– Avoid dropping or jarring your Aladin
®
Air Z O
2
– Do not allow your Aladin
®
Air Z O
2
to be exposed to direct, intense sunlight.
– Rinse your Aladin
®
Air Z O
2
thoroughly with fresh water after each dive.
– Do not store your Aladin
®
Air Z O
2
in a sealed container; make sure there is
free ventilation.
– If there are problems with operating the contacts, the surface of your Aladin
®
Air Z O
2
housing can be treated with silicone grease. Use soapy water to clean
the Aladin
®
Air Z O
2
before using silicone grease and dry it thoroughly.
– Do not clean the Aladin
®
Air Z O
2
with liquids containing solvent.
– There are borings in two of the contacts for the reception of the PC interface
connection (MemoMouse). Free these borings from dirt with a needle if neces-
sary.
Take the dive computer or the pressure transmitter to an authorized Uwatec
dealer in order to change the batteries. The actual change of the batteries is
made at the manufacturer or the importer. The computer is checked for its
technical functioning at the same time. Do not attempt to have the batteries
changed by anyone other than an authorized dealer. The battery of the Oxy2
can be replaced by a authorised retailer or – if the user knows how to solder
properly – by the user.