596878

UTStarcom Blitz Manual

34
Zoom out
Zoom in
Previous page
1/66
Next page
SECURITY
The Security menu allows you to electronically secure the phone.
The default lock code is the last 4 digits of your Mobile Telephone Number.
EDIT CODES
To set a new Lock Code:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 6. Phone Settings, 6. Security.
2. Enter the four-digit lock code, then press the OK Key
[OK].
3. Press “1. Edit Codes”.
4. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
•
Phone Only: Allows you to edit the Lock Code for Security. (The default Lock Code is
the last 4 digits of your Mobile Telephone Number.)
•
Calls & Services: Allows you to edit the Lock Code for Restrictions. (The default
Lock Code is “0000”. )
5. If “Phone Only” is selected, enter the new four-digit code in the
“Enter New Code” field. Enter the new four-digit code again in the
“Re-enter New Code” field.
6. If “Calls & Services” is selected, enter the current lock code in the
“Enter Current Code” field. Enter the new four-digit code in the
“Enter New Code” field. Enter the new four-digit code again.
7. Press the OK Key
[OK].
RESTRICTIONS
Use the following procedure to configure Location Setting, Calls and Messages
restrictions.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 6. Phone Settings, 6. Security.
2. Enter the four-digit Lock Code, then press the OK Key
[OK].
The default Lock Code is “0000”.
3. Press “2. Restrictions”.
4. Enter the four-digit Lock Code again, then press the OK Key
[OK].
64
Chapter 4 − Menu Function
SettingsSettings
5. Select one of the following settings:
•
Location Setting: Unlock Setting/Lock Setting.
•
Calls: Incoming Calls/Outgoing Calls
For Incoming Calls, set Allow All/Contacts Only/Block All.
For Outgoing Calls, set Allow All/Contacts Only/Block All.
•
Messages: Incoming Messages/Outgoing Messages
For Incoming Messages, set Allow All/Block All.
For Outgoing Messages, set Allow All/Block All.
PHONE LOCK SETTING
This setting specifies whether the phone should be locked whenever it is turned on.
Lock Mode prevents the unauthorized use of your phone. Once the phone is locked, it
is in restricted mode until the Lock Code is entered. You can still make emergency calls.
You can modify the Lock Code using the new Lock code within the Security menu.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 6. Phone Settings, 6. Security.
2. Enter the four-digit Lock Code, then press the OK Key
[OK].
The default lock code is the last 4 digits of your Mobile Telephone
Number.
3. Press “3. Phone Lock Setting”.
4. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
•
Unlocked: Phone is unlocked.
•
On Power Up: Phone will lock when it is turned on.
LOCK PHONE NOW
Lock the phone now.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key
[MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 6. Phone Settings, 6. Security.
2. Enter the four-digit Lock Code, then press the OK Key
[OK].
The default Lock Code is the last 4 digits of your mobile telephone
number.
3. Press “4. Lock Phone Now”.
4. To unlock the phone, in stanby mode, press the Right Soft Key
[Unlock] and enter the four-digit Lock Code, then press the
OK Key [OK].
Menu Function − Chapter 4
65
SettingsSettings
080625_TXT8010_ELVIS_M_EN_REV00.indd 64-65080625_TXT8010_ELVIS_M_EN_REV00.indd 64-65 2008.6.25 9:35:10 PM2008.6.25 9:35:10 PM
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UTStarcom Blitz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UTStarcom Blitz in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info