484775
12
Zoom out
Zoom in
Previous page
1/34
Next page
© U.S BLASTER Design - USA - P.O. Box 5376 - Carefree - AZ 85377.
USB 7392 - 7393
Microphone systems
SETTING UP YOUR HANDHELD TRANSMITTER (WIRELESS MICROPHONE)
To change frequency / channel press “SET” until the LCD screen displays CH001 *(channel
display values) or 750.000*(frequency display values) (*varies depends on current settings). Press the up
or down buttons to select a different channel/frequency (channel ranges from 1-99). Then the LCD screen
will flash. Press “SET” again to confirm (if you don’t confirm, no adjustments will be made.)
NOTE: Match your frequency / channel to the receiver's. The RF indicator on the receiver will show a sig-
nal.
TO CHANGE DISPLAY BETWEEN FREQUENCY/CHANNEL:
“FREQUENCY” displays the frequency signal's actual units, while channel displays a substitute letter or
number.
Keep pressing set until LCD screen displays "DISPLAY". After 1-2 seconds the screen will show FYE 9 u (for
frequency) or CHAnnl (for channel). Note: Current display depends on settings. Press the up or down but-
ton to switch between the two. Then the LCD screen will flash. Press “SET” again to confirm (if you don't
confirm no adjustments will be made.)
TO UNLOCK/LOCK YOUR SETTINGS:
NO
TE: In lock mode settings can not be adjusted and transmitter can not be powered off, in unlock mode
all settings can be adjusted.
Keep pressing set until LCD screen displays "LOC SET" after 1-2 seconds the screen will display Loc OFF
(unlock) or Loc ON (locked). Press up or down to switch between the two settings. Then the LCD screen
will flash. Press “SET” again to confirm (if y
ou don't confirm no adjustments will be made.)
© US Blaster Europe BV
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for US Blaster USB 7393 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of US Blaster USB 7393 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info