11. PITCH % SELECT BUTTON
Select the pitch change range from ±8%, ±16%, ±32%, ±100%. The playback speed will change when you move the pitch control slider.
12. PITCH CONTROL SLIDER
To match the choices of playback speed (8%, 16%, 32%, 100%), you can choose what range you want between minimum (up side) and maximum
(bottom side) by moving the pitch control slider.
13. PITCH BEND + / - BUTTON
When each of the two CD players is playing, the pitch bend function allows the position of the bass beat to be matched after the pitch has been
adjusted. The pitch will automatically rise up to + 16% from the current setting while pressing the “ + “button. While pressing the “ – “ button, the
pitch will automatically drop to - 16 % from current setting. By the way of changing the pitch the position of the beats can be matched.
14. 3 HOT-CUE
This unit will allow you to play from 3 cue points instantly.
a.Set CUE memory: Press the MEMO button first, and then press the CUE button to complete the CUE setting, then this CUE button will light up.
b.Play” CUE” memory: Upon pressing specific CUE button, it will flash about 5 seconds.
Note: This function is not available during perform REVERSE sound effect.
15. +10 BUTTON/IDENTIFY
Pressed the button to forward 10 tracks. If you forward 10 tracks, and the tracks over total tracks, the unit will jump to track 1...
Identify function(MEMO):
CD setting information can be stored in the non-volatile memory. The stored information can be called out of the memory at the later time.
A. Disc identify function is workable with Pause Mode only.
B. Press the Disc identify button for 2 seconds in Pause mode. When the MEMO is saving into EEPROM, the LCD Display “AUTO CUE” will blinks at
2Hz frequency. The LCD Display “AUTO CUE” will blinks at 1Hz frequency after the saving procedure is completed.
2Hzf frequency blinking, MEMO is saving into the EEPROM
1Hzf frequency blinking, save completed.
C. When the CD includes tracks that CDJ840 has MEMO is inserted, the LCD Display “AUTO CUE” will ON.
D. When the CD includes tracks that CDJ840 has MEMO CUE Point is inserted, the LCD Display “AUTO CUE” blinks at 1Hz frequency.
E. Press the “+10/LOAD” button for 2 seconds, the recorded CUE TIME will load to the Micon Main Cue and the LCD Display “ AUTO CUE” blinks.
F. The Cue Point will shows on the LCD Display for 2.5 seconds after complete loading, and back to the previous display time before loading.
“Auto Cue” On: the CD includes MEMO tracks
1Hz frequency blinks: the song includes MEMO Cue Point
2Hz frequency blinks: Loading to the Micon Main Cue
16. JOG WHEEL
*Speed Control (SEARCH indicator off)
Rotating the wheel, in play mode, will change the playback speed accordingly. While rotating clockwise, the player speed increase; rotating
