784828
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
DS1717-072A
4. WIRING INSTRUCTIONS
Cavo Ethernet RJ45
Ipercom system is developed for to work with the EIA/TIA 568B standard.
Plug the cable into one of the RJ45 connectors with the Urmet logo.
Insert the wire in its guide, according to the provided colour code (Standard T568B).
Black sheath
8
1
Wire
No.
Cable colour
1 White-Orange
2 Orange
3 White-Green
4 Blue
Wire
No.
Cable colour
5 White-Blue
6 Green
7 White-Brown
8 Brown
Grey sheath
Cut the cables so that they protrude from the guide by about 5 mm, insert the guide in its plug and crimp
with the specially provided tool.
Plug
8
1
~ 5 mm
8
1
Make sure that the grey sheath stays inside the plug. This type of connection will NOT guarantee double
insulation.
Connect one end of the Ethernet cable to the POE switch of the system and the other end to the LAN
connector of the device.
When using the local power supply, rst connect the LAN cable to a non-POE port on the switch and then
connect it to the local power supply.
4.1 POWER SUPPLY
The 1717/21 video door phone can be supplied power in two dierent ways:
POE
48 V
local power supply
When the power supply is used, POE is not available because the video door phone is powered only by the
local power supply. In this case, RJ45 can be connected to the NO POE port of the switch.
4.2 DISTANCES AND CABLE SECTIONS
Type of connection Max distance Min - max cross section
Call to oor level 30 m 0,5 - 1 mm2
Panic Alarm 30 m 0,5 - 1 mm2
Supplementary ringer 30 m 0,5 - 1 mm2
External power supply 25 m 0,5 - 1 mm2
LAN 100 m CAT5e (*)
Wires with cross-section area of 0.5 mm2 or larger must comply with IEC 60332-1-2; wires with
cross section area smaller than 0.5 mm2 must comply with IEC 60332-2-2.
(*) To ensure longest-range video door phone operation, the cable must be a class 5e device and the
twisted pairs’ cross section must be AWG24.
The maximum resistance of the individual wires must not exceed 10ohm/100m.
The cable must be up to the following standards:
- EIA/TIA 568-B.2 or EIA/TIA 568-C.2
- EN50288 3-1
- IEC 61156-5
The connection between the video door phone and POE switch must be ensured by a single cable
without any extra patch cords.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Urmet 1717 Max Video Door Phone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Urmet 1717 Max Video Door Phone in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Urmet 1717 Max Video Door Phone

Urmet 1717 Max Video Door Phone User Manual - English - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info