741500

Urmet 1168 Manual

12
Zoom out
Zoom in
Previous page
1/40
Next page
12
DS1168-007
Either hold pressed for at least 5 seconds or leave the device inactive for more than 30 seconds to quit
programming mode.
The red button turns blue, the device will generate a long confi rmation beep and then return to normal
operation.
TIMESLOT TERMINAL PROGRAMMING PROCEDURE
By enabling the “time slot” function, a timer (not included) may be used to defi ne the times of the day when
to activate one of the two relays simply by pressing the
button.
Access programming mode.
Enter confi guration code 40 a where:
40 identifi es the programming function code
a defi nes the number of relays enabled during the timeslots.
1 = relay 1
2 = relay 2
0 = function off
Press to confi rm.
The device generates 3 confi rmation beeps and the button turns from red to blue to red.
If the entered code is wrong, the device will generate one long beep and wait for the correct code to be
entered.
Either hold pressed for at least 5 seconds or leave the device inactive for more than 30 seconds to quit
programming mode.
The red button turns blue, the device will generate a long confi rmation beep and then return to normal
operation.
DEVICE RESET (TO RESTORE DEFAULT SETTINGS)
Disconnect power from the device.
Hold the programming switch (SW1) pressed.
Power the device while the SW1 switch is pressed. A long beep will be heard.
Release the switch after 5 seconds.
The device will beep 3 times for confi rmation when the switch is released.
All the previously programmed codes, times and passwords will be deleted.
DEFAULT SETTINGS
Relay 1
Function Monostable
Activation time 200 ms
Button confi rmation No
Relay 2
Function Monostable
Activation time 200 ms
Button confi rmation No
Timeslot terminal OFF
Operating mode jumper: 2Voice and Ipercom systems
MAINTENANCE
Use a soft damp cloth to clean the front panels. Do not use products containing alcohol or window cleaning
products.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Urmet 1168 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Urmet 1168 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info