484939

Upo TC 7060 Manual

71
Zoom out
Zoom in
Previous page
1/76
Next page
71
INSTALLATION INSTRUCTIONS
IMPORTANT: The adhesive will stick immediately on contact. Consequently, make sure that
the
foot anchor is in the correct position before it makes contact with the washing machine.
If
the washing machine/drier stack is to be moved to another location in the future, the foot
an
chors should not be removed. Once removed, the foot anchors will no longer be able to
adhere to the surfac
e.
5. Hold the foot anchor in position and replace the drier on top of the washing machine. The foot anchor
will remain in the correct position, stu
ck to the top of the washing machine.
6. Repeat the operation for the other front foot.
COMPLETING THE INSTALLATION
2. Slide the drier forwards towards the front of the washing machine.
The stacking brackets will slide over the back edge of the washing machine and
into position (
fi g. 25/26).
GB
INSTALLING THE DRIER ON TOP OF THE WASHING MACHINE
25
26
A
27
Anchoring the front feet of the drier
3. Lean the drier backwards to lift the two front feet off the washing machine. Hold
the
drier in this position and fi t one of the foot anchors on one of the front feet of
the drier. Refer to the fi gure alongside for the correct position of the foot anchor
(fi g.27).
A. When the installation is complete, this edge should be visible from the front.
4. Remove the fi lm covering the adhesive on the bottom of the foot anchor.
1.
Check that the two brackets on the back of the washing machine are fi rmly anchored in position. If
there is any play in the brackets, use the 24 mm spanner to tighten the two back feet of the drier to
ma
ke sure that the brackets are fi rmly anchored to the back edge of the washing machine.
2.
Lift the front of the drier and adjust the two front feet to the same height as the back feet.
3.
Place a level on the top of the drier to make sure it is sitting correctly. Check the level from one side
to the other fi rst, then from front to back.
If the washing machine and drier are not level, adjust the feet of the drier as necessary and repeat
the level check.
… 71 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Upo TC 7060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Upo TC 7060 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 72,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info