484938
63
Zoom out
Zoom in
Previous page
1/68
Next page
63
SM2212
INSTALLATION INSTRUCTIONS
3. Remove the two screws from the bottom of the drier and keep them (for vented
drier models only).
4. Fit the two brackets on the back edge of the washing machine, as shown (fi g.
22), using the two screws supplied with the kit.
A. Remove the two screws (for vented drier models only fi g. 22).
B. Fix the brackets (fi g. 23/24).
A
B
Vented model
Condenser model
B
5. Use a 24 mm spanner to screw in the four feet of the drier as far as they will go and make contact
with the bottom of the drier. Do not use excess force.
6. Place the drier in the upright position.
7. Use the soft cloth and water with added mild detergent to clean the top of the washing machine.
This is to ensure that the adhesive foot supports supplied adhere properly to the surface.
GB
FITTING THE STACKING BRACKETS
21
22
2323 24
1. With the help of 2 or more persons, lift the drier and place it on top of the washing machine.
Make sure that the stacking brackets are positioned away from the back edge of the washing ma-
chine.
INSTALLING THE DRIER ON TOP OF THE WASHING MACHINE
WARNING: Heavy weight. Use two or more persons to transport and install the
drier.
NON COMPLIANCE WITH THIS WARNING MAY LEAD TO BACK INJURY OR OTHER.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Upo TC 7050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Upo TC 7050 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 11,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info