581329
4
Zoom out
Zoom in
Previous page
1/8
Next page
5
6
23
PERIOD
MORNING
DAY
EVENING
NIGHT
Below is a Schedule of the Pre-programmed Time and Temperature Settings:
P TIME
Programs
This thermostat is equipped with 5+1+1 day programming - separate programming for weekdays,
Saturday and Sunday, with four settings per day. This thermostat is pre-programmed for your
convenience or you can set your own programs as desired.
Program 1: MORNING
Program 2: DAY
Program 3: EVENING
Program 4: NIGHT
Heating and Cooling modes have separate programs.
P1
P2
P3
P4
6:00am
8:00am
5:00pm
10:00pm
HEAT COOL
SETPOINT
oo
69.0 F (20.5 C)
oo
63.5 F (17.5 C)
oo
70.0 F (21.0 C)
oo
62.5 F (17.0 C)
oo
77.0 F (25.0 C)
oo
84.0 F (29.0 C)
oo
77.0 F (25.0 C)
oo
79.0 F (26.0 C)
SETPOINT
Heating Program
Slide the system switch to the HEAT position and press the PROG key once. The P1 and
SET PROGRAM symbol will appear on the display. MO to FR symbol is shown indicating weekday
program is being displayed. (Figure 1)
Use AHEAD or BACK to select the desired start time for weekday program 1.
Use UP or DOWN (on extreme right) to set the desired temperature.
Temperature can be set in increments of 0.5°.
Program time can be set in increments of 10 minutes.
After setting correct time and temperature for program 1, press PROG again to display weekday
program 2. Use same method to set the desired time and temperature for weekday program 2.
2
1
3
4
6
5
2-wire heating
Heating Relay
RC
RH
Y
W
H2
H1
B
O
G
Heating Relay
Fan Relay
RC
RH
Y
W
H2
H1
B
O
G
JUMPER
Cooling Relay
Heating Relay
Fan Relay
RC
RH
Y
W
H2
H1
B
O
G
JUMPER
3-wire heating
4-wire heating/cooling
5-wire heating/cooling
RC
RH
Y
W
H2
H1
B
O
G
Heating Relay
Fan Relay
Cooling Relay
Cool Damper
Heat Damper
Optional
Wiring
Heat Transformer
Cool Transformer
this is typically for the morning when you may prefer a warmer temperature.
this is an energy-savings mode for the time you are away from home. The
setting can be adjusted to minimize energy consumption.
this is for the time you return home and want the house at a comfortable
temperature, typically warmer settings during winter and cooler settings
during summer.
this is a sleep mode. You may choose to set temperature for energy savings
or comfort as desired.
:
:
:
:
Wiring Diagram
24
Installing control wires for humidifier control (THM303M only)
If control of the humidifier is desired, the 2 wires connecting the original humidistat needs to be
connected to the 2 terminals marked 'H1' and 'H2' on the THM303M.
The original humidistat should be removed or set to 'OFF' position.
Noted: The 2 humidifier control terminals 'H1' and 'H2' are electrically isolated from the Heat / Cool
terminals.
RC
RH
Y
W
H2
H1
B
O
G
Humidifier
M
Humidistat should be off or Disconnected
JUMPER
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UPM THM303M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UPM THM303M in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of UPM THM303M

UPM THM303M User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info