581316
6
Zoom out
Zoom in
Previous page
1/30
Next page
6
PROGRAM THE RECEIVER
The receivers must be programmed to recognize signals
from the remote control. Each receiver must be assigned
a channel from 1 to 10. Receivers may be given their own
channel, enabling the remote to control each unit
individually, or they may be controlled as part of a group.
Any receivers assigned to the same channel group will be
issued the same commands at the same time.
(For example, one may choose to activate their lighting
and home stereo system with a single command.)
1) Place the receiver in the wall socket.
2) Press [FUNCTION] [6]
3) Select channel (1-10), for example, press [1]
4) Press down any of the buttons on the receiver
within 10 seconds. The red light on the receiver will
start to flash to indicate that the receiver has detected
the signal from the remote control. [OK] appears on
screen to inform you that the signal detection IKT201
has ended.
5) Press [FUNCTION] on the remote control. If you have
several receivers, repeat steps 1-5 choosing other
channels. (up to 10 channels.
OK
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UPM IKT201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UPM IKT201 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of UPM IKT201

UPM IKT201 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info