581311
26
Zoom out
Zoom in
Previous page
1/30
Next page
24
Heat Cycle Rate
Cycle rate determines the heating on/off time cycles and the level of proportional power required to
operate the heater. (To have the heater operate at full power all the time, select Cr 0 to disable heat
cycling.) The cycle rate is based on the type of heating system and the power load required to operate
the device. The higher the load (size of baseboard or radiant heater) the greater the heat generated.
Cr 0 is continuous operation (no cycling), with a variance of +/- 0.3°C (+/- 0.6°F). The heating unit will
operate at full power and the arrow bar icon will appear full. This function is for users who do not want
their electric heating devices to turn on and off frequently.
Cr 1 is a 20 second cycle rate with proportional heating. This means the heating will be turned on
and off once every 20 seconds to provide a stable room temperature. This cycle rate allows a proportion
level of power to the heating device. This is indicated on the thermostat display by the arrow bar icon
which will be partially filled, indicating the amount of power going to the heater. This setting is
recommended for standard electric heating devices, without fans, and will provide the most energy
efficient heating and a stable temperature.
Cr 2 is a 240 second span. This means the heating will be turned on and off once every 240 seconds.
This is the recommended setting for fan assisted heaters and radiant floors and ceilings.
Final Size: 5” x 3” / 12.5cm x 7.5cm
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UPM HTM611A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UPM HTM611A in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of UPM HTM611A

UPM HTM611A User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info