Manual Unox XF195 Dynamic (page 5 of 72) (English, German, French, Italian, Spanish)

636396

Zoom out

Zoom in

1/72

UNO

WARNING:

Connect the electrical cable to the terminal board

as shown on the drawing: insert screw-wise the

copper bridge and the electrical cable together

under the screw. Tighten the screw paying attention

that the cable and the copper bridge are well fixed

under the screw. A wrong connection can cause the

overheating of the terminal board which can also

melt.

4.2 WATER CONNECTION

CONNECTION TO THE WATER NET

(only for ovens with Humidity)

It is necessary to place a mechanical filter between

the water system and the water connection of the

oven.

Before connecting the water pipe to the oven,

please let a certain quantity of water flow to clean

the duct from any eventual remainder.

The water used in the oven must have a nominal

pressure value included between 0.5 and 2 bars.

The water must have a hardness included between

0.5° and 5°F ( this in order to avoid formation of

limestone deposits inside the electric valve and

inside the cavity).

We suggest you to us a decalcification appliance

in order to avoid fan balancing.

CONNECTION TO AN EXTERNAL WATER

TANK

(Substitution of the water electric valve with the

water pump)

In all models where this option is available, to

substitute the electric water valve with the pump

to suck water into the oven you must operate as

follows:

- remove the back of the oven

- disconnect the power supply wires from the

electric water valve

- fix the water pump (4) to the oven using the

supplied support (5)

- connect the internal water pipe to the pump

using the rapid connection

- connect the inlet water pipe (3) to the

pump

- cut the other water pipe edge as shown on

the drawing, insert the sinker (2) and fix it to

the water filter.

- reassemble the back of the oven.

Use only decalcified water (see paragraph 4.2)

WARNING:

every time you have to use the appliance with the

pump, always make yourself sure that there is water

in the tank. If you use the pump without water in the

tank, the pump itself can burn. If the pump utters

an anomalous sound, it might be due to the lack of

water in the tank.

FUMES EXIT FROM CAVITY

In the back side of the oven you find a fume chimney

from which the fumes that come from the cavity are

ejected. During each cooking cycle you will have

hot and wet fumes coming out from this chimney

(temperature and humidity of the fumes depend on

the cooking parameters set on the oven and on the

type and quantity of food put inside the oven).

The fumes that come out from the chimney can

be guided outside the room where the oven is

installed or can be condensated using the proper

condensating hood available as an option (only

in the ovens equipped with “DYNAMIC” control

panel).

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unox XF195 Dynamic in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unox XF195 Dynamic Manual

Product: