636392
3
Zoom out
Zoom in
Previous page
1/72
Next page
UNO
X
R
I. INSTRUCTION FOR THE
INSTALLER
Dear Customer, we would like to thank you and
congratulate you on the purchase of one of UNOX
products. The instructions and suggestions that
follow concern the phases of a proper installation,
as well as the use and maintenance for your safety
and for the best use of the appliance.
1. DATA PLATE
2. CERTIFICATION
The “CE” brand you find on our labels and on our user
manual refers to the following directives:
ELECTRIC CONVECTION OVENS - SERIES XF:
- Low Tension Directive
DBT 73/23/CEE e 93/68/CEE,
according to rule EN60335-2-42+A1 and
according to rule EN60335-2-46+A1
- Electromagnetic Compatibility Directive,
according to rules EN6555-3, EN55014,
EN55104 and
EN50366(2003).
3. INSTALLATION
- PRELIMINARY OPERATIONS
All the electrical connections and installation
operations must be done by qualified personnel
accordino to actual laws.
3.1 CHECK THE LOCATION OF INSTALLATION
Before placing the appliance, please verify the
overall measurements and the exact position of
the electrical and water connections looking at the
pictures on the attached file “TECHNICAL DATA”.
3.2 FEET ASSEMBLY
You find the feet inside the appliance. The feet must
absolutely be assembled on the oven.
Do not ever use the appliance without its feet.
Assemble the feet as showed in picture:
3.3 POSITIONING
Place the appliance respecting the safety standards
in force that you find here following described.
Place the appliance so that its back and sides can
be easily reached in order to make the electrical
connections and provide the needed service.
The appliance is not suitable for built-in installation
and side by side positioning.
It is suggested to leave a distance of 10 cm.
Between the eventual wall on the back of the oven
and the chimney.
With particular reference to the ovens, all models
must be placed upon a support, for example a
prover, a stand or on the top of a table built with
non-combustible material.
Never install the appliance on the floor.
If the appliance is placed near walls, dividers, kitchen
cabinets, decorated edges, etc., it is recommended
that this be of non combustible material.
Otherwise, they must be coated with non combustible
thermal insulating material and you must be very
respectful of the fire prevention standards.
3.4 REMOVE THE PROTECTIVE FILM
ENGLISH
ENGLISH
3
UNOX S.p.A.
Via dell'Artigianato, 28/30
35010 - Vigodarzere (PD) - ITALY
MOD.: XF198
PATENTED
MOD:
S/N
S/N: 00000
PROD: gg/mm/aaaa
0000000000000 0000000000000
TYPE: kW: POWER: FREQUENCY:
!
SERIE
TENSION D'ALIMENTACION
MODELE DU FOUR
CERTIFICATIONS
PUISSANCE ELECTRONIC
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unox XF180 Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unox XF180 Classic in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info