554537
16
Zoom out
Zoom in
Previous page
1/22
Next page
C
A
B D3D1 D2
SpidoTouch digital control operation
Control Panel:
Powerswitch(A)
Activates the unit.
Buttonlocatedoutside:contactgrillo
Buttonlocatedinside:contactgrillon
SpidoTouch digital control(B)
Allows you to set the cooking time and tem-
perature and store up to 4 programmes.
Temperaturelight(C)
Light on: Heat is on.
Light o: Set temperature reached
Time and cooking temperature parameter setting
temperature
(max.300°C)
Time
0 = STOP (grill OFF)
00:01....9:59 (maximum time)
INF= innite operation (plate always on)
• Setthecookingdurationbyrepeatedlypushing(slowmode)orholdingdown(fastmode)the
button
untilthedesiredtimeappearsonthescreen(thevaluehasbeensavedwhentheLED(D1)stopsashing).
• The countdown starts right after having set the duration with a value other than “0”, and the plate will start
to heat until reaching the pre-set temperature of 200°C. To change this value, push the button until the
desiredtemperatureappearsonthescreen(thevaluehasbeensavedwhentheLED(D2)stopsashing).
NOTE: if you press the buttonbeforethedurationLED(D1)hasstoppedashing,theplatewillheatuntil
it reaches a temperature of approximately 200°C.
• To prematurely stop cooking, repeatedly press the button until 00:00 appears on the screen.
• Example:Ifyouwanttocookatatemperatureof220°Cfor5minutesand30seconds.
Turn on the plate with the button (A), hold down the button until 5.30 (5 minutes and 30 seconds) appears on
the screen. After a few seconds, the LED (D1) stops ashing: the cooking time has been saved, the countdown starts
and the plate starts to heat to the pre-set temperature of 200°C.
To increase the temperature, hold down the button until the temperature of 220°C appears on the screen.
After a few seconds, the LED (D2) stops ashing: the cooking temperature has been saved.
When the pilot light (C) turns o, the plate has reached the set temperature (220°C).
Program storage and use
Up to fourprogrammes(P1, P2, P3 andP4) can be saved for subsequent use.
PROGRAM STORAGE
Set the time and temperature parameters as describe previously (example 8 min. / 220°C).
To store the program press and hold the button P1, P2, P3 or P4 (ex. P3) for at least 3 seconds: the conrmation
ofrecordingtakesplacewiththelightonforonesecondoftheLEDlight(D3)andthebuzzer.
E.g.: Programme P3 = the plate will work at 220°C for 8 minutes
english
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unox SpidoCook at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unox SpidoCook in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Unox SpidoCook

Unox SpidoCook User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info